首页 | 本学科首页   官方微博 | 高级检索  
     

磁性磨粒磨料混合均匀度测试与分析
引用本文:陈修忠,陈红玲,赵珂.磁性磨粒磨料混合均匀度测试与分析[J].磁性材料及器件,2015(2):57-60.
作者姓名:陈修忠  陈红玲  赵珂
作者单位:太原理工大学 机械工程学院,山西太原,030024
基金项目:国家自然科学基金资助项目(51175365);山西省科技攻关项目
摘    要:磁性磨粒是兼有磨削能力和磁化性能的铁基复合磨粒,主要由磁介质相(铁粉)和磨粒相(碳化硅、氧化铝或金刚石等)组成。磨料的混合均匀度是影响磁性磨粒综合性能的关键工艺参数之一。利用变异系数CV表示磨料的混合均匀度,采用磁体吸附法测试与分析磨粒相、混合时间对混合均匀度的影响。结果表明,该测试方法简单易行、合理可靠,并得到不同类型的磨料在混合6~6.5h,变异系数CV为0.129%~0.233%,达到很好的混合均匀度,为更好地制备磁性磨粒、提高磁性磨粒的综合性能提供了合理的工艺参数。

关 键 词:磁性磨粒  均匀度  变异系数  混合时间

Measurement and analysis on the abrasive grain mixing evenness of magnetic abrasive
CHEN Xiu-zhong,CHEN Hong-ling,ZHAO-Ke.Measurement and analysis on the abrasive grain mixing evenness of magnetic abrasive[J].Journal of Magnetic Materials and Devices,2015(2):57-60.
Authors:CHEN Xiu-zhong  CHEN Hong-ling  ZHAO-Ke
Affiliation:CHEN Xiu-zhong;CHEN Hong-ling;ZHAO-Ke;College of Mechanical Engineering, Taiyuan University of Technology;
Abstract:Magnetic abrasive is iron-based composite grinding grain with magnetic and grinding characteristics, mainly composed of magnetic medium phase (iron powder) and particle phase (silicon carbide,aluminium oxide or adamant and so on). The mixing evenness of magnetic abrasive grain is one of the key process parameters that affects the comprehensive performance. The variation coefficient CV is uesd to express abrasive mixing uniformity, and magnet adsorption is used to test and analyze the influence of abrasive grain phase and mixing time on the mixing evenness. The result shows that the method is simple, accurate and reliable, and for different types of abrasive mixing for 6 to 6.5h, the variation coefficient CV is 0.129% to 0.233%, achieving good uniformity, providing the reasonable process parameters for the preparation and comprehensive performance improvement of magnetic abrasive.
Keywords:magnetic abrasive  evenness  variation coefficient  mixing time
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号