首页 | 本学科首页   官方微博 | 高级检索  
     

500kV牌长Ⅱ线空载投切试验方案选取仿真分析
引用本文:王丽蓉,李欣,何智强,齐飞.500kV牌长Ⅱ线空载投切试验方案选取仿真分析[J].湖南电力,2014(1):12-15.
作者姓名:王丽蓉  李欣  何智强  齐飞
作者单位:[1]国网湖南省电力公司检修公司, 湖南 长沙410004 [2]国网湖南省电力公司电力科学研究院 ,湖南 长沙410007
摘    要:根据500 kV牌长Ⅱ线接线方式和线路参数,计算空载长线工频过电压升高倍数,利用电磁暂态仿真软件ATP,建立500 kV牌长Ⅱ线的仿真模型,仿真不同运行方式下的工频电压升高和操作过电压倍数,结合仿真结果和试验情况,提出最佳的试验方案。

关 键 词:超高压输电线路  工频电压升高  操作过电压  空载投切试验

Simulating and analysis of source selecting for 500 kV Paichang Ⅱ line no-load switching test
WANG Li-rong,LI Xin,HE Zhi-qiang,QI Fei.Simulating and analysis of source selecting for 500 kV Paichang Ⅱ line no-load switching test[J].Hunan Electric Power,2014(1):12-15.
Authors:WANG Li-rong  LI Xin  HE Zhi-qiang  QI Fei
Affiliation:1. State Grid Hunan Electric Power Corporation Maintenance Company, Changsha 410004, China; 2. State Grid Hunan Electric Power Corporation Research Institute, Changsha 410007, China)
Abstract:Based on wring mode and line parameters of 500 kV PaichangⅡ,this papers computes power frequency over-voltage rising times of no-load long line, then builds simulation model of 500 kV Paichang Ⅱ line and simulates power frequency voltage rising and switching over-voltage times in different operation mode by electromagnetic transient simulation software ATP . Combining simulation results and test situation,this thesis proposes the best method.
Keywords:ATP  EHV transmission line  power frequency voltage rising  switching over-voltage  ATP  no-load switching test
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号