首页 | 本学科首页   官方微博 | 高级检索  
     

基于重复控制的SPWM逆变电源死区效应补偿技术
引用本文:段善旭,孙朝晖,张凯,康勇,陈坚.基于重复控制的SPWM逆变电源死区效应补偿技术[J].电工技术学报,2004,19(2):52-57,63.
作者姓名:段善旭  孙朝晖  张凯  康勇  陈坚
作者单位:华中科技大学电气与电子工程学院,武汉,430074;华中科技大学电气与电子工程学院,武汉,430074;华中科技大学电气与电子工程学院,武汉,430074;华中科技大学电气与电子工程学院,武汉,430074;华中科技大学电气与电子工程学院,武汉,430074
摘    要:在SPWM逆变器中,为防止同一桥臂的上下管直通现象,必须注入一定的死区时间,死区会导致逆变器的输出波形畸变,即死区效应.在分析了死区时间对单相SPWM逆变器输出波形特性的影响的基础上,提出了一种基于重复控制的死区补偿控制策略,该控制方法可有效地改善输出电压的波形畸变,并在一台单相400Hz、5.5kW装置上进行了详细的实验验证,实验结果表明了该补偿策略的有效性和实用性.

关 键 词:正弦脉宽调制  逆变器  死区  重复控制  补偿
修稿时间:2003年6月30日

A Compensation Strategy for Dead-time Effect of SPWM Inverters Based on Repetitive Control
Duan Shanxu,Sun Zhaohui,Zhang Kai,Kang Yong,Chen Jian.A Compensation Strategy for Dead-time Effect of SPWM Inverters Based on Repetitive Control[J].Transactions of China Electrotechnical Society,2004,19(2):52-57,63.
Authors:Duan Shanxu  Sun Zhaohui  Zhang Kai  Kang Yong  Chen Jian
Affiliation:Huazhong University of Science & Technology Wuhan 430074 China
Abstract:A few microseconds dead-time must be inserted into the switching signals of SPWM inverters to prevent the short circuit. This can cause the dead-time effect of the output voltage distortion. The influence of dead-time on output voltage in single-phase SPWM inverters is analyzed in detail. A novel dead-time compensation strategy, which can provide excellent inverter output voltage distortion correction based on repetitive control, is also proposed. The experimental results on a 400Hz 5.5kW prototype of inverter are presented to demonstrate the practicability and validity of the control strategy.
Keywords:SPWM  inverter  dead-time  repetitive control  compensation  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号