首页 | 本学科首页   官方微博 | 高级检索  
     

互补控制的有源钳位型零电压开关功率因数校正器
引用本文:吴新科,张军明,钱照明,赵荣祥.互补控制的有源钳位型零电压开关功率因数校正器[J].电工技术学报,2011(2):123-128.
作者姓名:吴新科  张军明  钱照明  赵荣祥
作者单位:浙江大学电气工程学院;
基金项目:教育部博士后基金特别资助项目(20081469)
摘    要:分析了一种改进的零电压开关功率因数校正(PFC)变流器,并给出了优化设计方法.有源钳位Boost变流器中,可以通过一个辅助开关管,一个很小的辅助电感和一个钳位电容实现所有开关器件的零电压开通.通过增加一个很小的辅助二极管VDc,钳位升压二极管上的电压振荡,降低了有源钳位Boost变流器中升压二极管的电压应力.根据优化设...

关 键 词:功率因数校正  有源钳位  零电压开关  优化设计

Active Clamp ZVS Power Factor Correction Converter With Complementary Control Method
Wu Xinke Zhang Junming Qian Zhaoming Zhao Rongxiang.Active Clamp ZVS Power Factor Correction Converter With Complementary Control Method[J].Transactions of China Electrotechnical Society,2011(2):123-128.
Authors:Wu Xinke Zhang Junming Qian Zhaoming Zhao Rongxiang
Affiliation:Wu Xinke Zhang Junming Qian Zhaoming Zhao Rongxiang(Zhejiang University Hangzhou 310027 China)
Abstract:An improved zero voltage switching(ZVS) power factor correction converter is proposed and analyzed in this paper.The optimal design guideline is presented.By using an auxiliary switch,a small auxiliary inductor and a clamp capacitor,ZVS for all switches are achieved.To eliminate the voltage ringing across the output rectifier diode,a small diode VDc is added to clamp the voltage.A 500W PFC prototype with universal input is built up to verify the theoretical analysis.The efficiency can reach 95.5% at 90V inp...
Keywords:Power factor correction  active clamping  ZVS  optimal design considerations  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号