首页 | 本学科首页   官方微博 | 高级检索  
     

磁悬浮轴承并联谐振直流环节开关功率放大器
引用本文:王军,徐龙祥.磁悬浮轴承并联谐振直流环节开关功率放大器[J].中国电机工程学报,2009,29(12):87-92.
作者姓名:王军  徐龙祥
作者单位:南京航空航天大学机电学院
基金项目:国家自然科学基金项目(50437010);国家863高技术基金项目(2006AA05Z205)。
摘    要:为克服磁悬浮轴承开关功率放大器工作在硬开关状态时存在的开关损耗和电流纹波干扰严重的缺点,提出一种磁悬浮轴承并联谐振直流环节的软开关功率放大器电路。该电路在功率放大器三电平控制策略的基础上应用了并联谐振直流环节,保持了三电平功率放大器输出电流纹波小的优点,同时功率器件均工作在零电压或零电流条件下,开关损耗、电流纹波干扰有效地减小。详细分析并联谐振直流环节的软开关功率放大器电路工作过程,并进行仿真和样机实验。实验结果证明所提出电路是可行有效的。

关 键 词:软开关  开关功率放大器  三电平  并联谐振  磁悬浮轴承
收稿时间:2008-11-05

Parallel Resonant DC Link Soft-switching Power Amplifier of Magnetic Bearing
WANG Jun,XU Long-xiang.Parallel Resonant DC Link Soft-switching Power Amplifier of Magnetic Bearing[J].Proceedings of the CSEE,2009,29(12):87-92.
Authors:WANG Jun  XU Long-xiang
Affiliation:College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics
Abstract:Switching power amplifier of magnetic bearing worked in hard switching. To overcome drawbacks of large loss of switching and current harmonic distortion, a parallel resonant DC link soft-switching power amplifier was adopted in this paper. The ways of parallel resonant DC link and three-level control strategy were used in this power amplifier circuit. Output current ripple of power amplifier can be reduced as three-level power amplifier, all of power switches work on and off under the zero voltage switching or zero current switching, loss of switching and current ripple interference effectively reduced. The soft-switching control detail operations were analyzed. The simulation and experimental results show that the proposed circuit is feasible and effective.
Keywords:soft-switching  switching power amplifier  three-level  parallel resonant  magnetic bearing
点击此处可从《中国电机工程学报》浏览原始摘要信息
点击此处可从《中国电机工程学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号