首页 | 本学科首页   官方微博 | 高级检索  
     

感应同步器的部分元等效电路模型
引用本文:刘承军,邹继斌.感应同步器的部分元等效电路模型[J].中国电机工程学报,2010(6).
作者姓名:刘承军  邹继斌
作者单位:机器人技术与系统国家重点实验室(哈尔滨工业大学);
基金项目:国家自然科学基金项目(50777012)~~
摘    要:输出电势的数学模型是分析感应同步器误差及进行绕组优化设计的理论基础。传统的数学模型未考虑激磁绕组邻近效应引起的电流分布不均对输出电势的影响,从而会在高频下带来较大的谐波电势计算误差。建立了基于部分元等效电路方法的输出电势数学模型,研究激磁绕组的电流分布特性,计算了激磁绕组在不同工作频率、不同结构参数下感应绕组的输出电势,分析其位置函数的谐波成分,并提出消除谐波电势的途径。最后通过实验验证了模型的准确性。

关 键 词:感应同步器  数学模型  输出电势  等效电路  

Partial Element Equivalent Circuit Model of Inductosyn
LIU Cheng-jun,ZOU Ji-bin ,Harbin ,Heilongjiang Province,China.Partial Element Equivalent Circuit Model of Inductosyn[J].Proceedings of the CSEE,2010(6).
Authors:LIU Cheng-jun  ZOU Ji-bin  Harbin  Heilongjiang Province  China
Affiliation:LIU Cheng-jun,ZOU Ji-bin (State Key Laboratory of Robotic Technology , System (Harbin Institute of Technology),Harbin 150001,Heilongjiang Province,China)
Abstract:The mathematical model of output voltage is the theoretical basis for analyzing the errors of inductosyn and optimizing design of windings. For the current misdistribution caused by contiguity effect between the exciting windings not being taken into account in traditional mathematical model,the bigger calculation error of harmonic voltages is brought out when the high frequency alternating current flows in the exciting windings. A mathematical model of output voltage based on partial element equivalent cir...
Keywords:inductosyn  mathematical model  output voltage  equivalent circuit  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号