首页 | 本学科首页   官方微博 | 高级检索  
     

T型输电系统故障测距算法研究
引用本文:束洪春,高峰,陈学允,许承斌.T型输电系统故障测距算法研究[J].中国电机工程学报,1998,18(6):416-420,437.
作者姓名:束洪春  高峰  陈学允  许承斌
作者单位:1. 云南工业大学电力工程系,昆明,650051
2. 哈尔滨工业大学电气工程系,哈尔滨,150001
基金项目:中国博士后基金,云南省应用基础基金
摘    要:利用单端工频量的输电线路故障测距算法,较难解决多系统的故障定位问题,基于分布参数线路模型,提出三端系统故障测距的新方法,其特点为;(1)各端之间不需同步测量,因此,不需实时通信,只需故障后分析,(2)对于单回线T结和单回线-双回线T结,不需区分短路模型。(3)亦适合于长线的短路点定位,且原理上,测距精度与分布电容,过渡阻抗,负荷电流和系统运行方式等因素无关,模拟故障测距的数字仿真试验表明,方法有效

关 键 词:输电线路  保护  故障定位  T型  故障测距  算法

A Study on Accurate Fault Location Algorithm of EHV T-Connection to Three Terminals
Shu Hongchun,Gao Feng,Chen Xueyun,Xu Chengbin.A Study on Accurate Fault Location Algorithm of EHV T-Connection to Three Terminals[J].Proceedings of the CSEE,1998,18(6):416-420,437.
Authors:Shu Hongchun  Gao Feng  Chen Xueyun  Xu Chengbin
Abstract:Conventional fault location algorithms using one terminal data are not applicable to multi terminal system.RLC distributed line model based fault location algorithm for EHV T connection is presented.The development technqiue has improved following aspacts:(1)The measurements at the three ends are not required to be synchronized.Thus the scheme does not requrie real time communication,only off line post fault analysis.(2) It isn't necessary to classifty fault for the T connection constructured by single and single circuit lines or by single and double circuit lines.(3)The technique is suitable for long line,too.Theorectically,the accuracy of locating fault is virtually free from shunt capacitance,fault transient impedance,fault distance,load currents and source impedances.The digital simulation results show the high accuracy of the proposed fault locaton technique.
Keywords:T    Connection    power system protection    fault location
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号