| 基于CAN总线的智能断路器网络模型 |
| |
| 引用本文： | 王珂,郑元兵.基于CAN总线的智能断路器网络模型[J].低压电器,2010(19):22-25,59. |
| |
| 作者姓名： | 王珂 郑元兵 |
| |
| 作者单位： | 1. 同济大学,上海,201804
2. 重庆大学,电气工程学院,重庆,400044 |
| |
| 摘 要： | 针对智能电网对智能断路器通信功能的新要求,建立了三级网络模型。智能断路器通过CAN总线网络接入变电站主控制室,实现实时监控,并通过CAN-TCP/IP协议转换电路接入以太网,在电力调度中心实现＂四遥＂功能,并通过以太网,与发电、供电网络间进行双向通信。
|
| 关 键 词： | 智能控制器 三段保护 CAN总线 低压断路器 |
Research on Network Model of Intelligent Circuit Breaker Based on CAN Bus |
| |
| WANG Ke,ZHENG Yuanbing.Research on Network Model of Intelligent Circuit Breaker Based on CAN Bus[J].Low Voltage Apparatus,2010(19):22-25,59. |
| |
| Authors: | WANG Ke ZHENG Yuanbing |
| |
| Affiliation: | WANG Ke1,ZHENG Yuanbing2(1.Tongji University,Shanghai 201804,China,2.College of Electrical Engineering,Chongqing University,Chongqing 400044,China) |
| |
| Abstract: | Aiming at the new requirements of smart grid for intelligent circuit breaker’s communication func-tion,a three-stage network model was built.The intelligent circuit breaker was connected to the master control room of electric substation through CAN bus network,so that the real time supervision of the intelligent circuit breaker was realized,and also connected to EtherNet through CAN-TCP/IP protocol converter,so that the＂four remote＂ function in the electric power control center was realized,then intercommunicated with power grid through EtherNet. |
| |
| Keywords: | intelligent controller three-step protection CAN bus low voltage circuit breaker |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
