| 基于ADAMS的塑壳式断路器操作机构可靠性分析 |
| |
| 引用本文： | 苏秀苹,任俊勇,刘金鹿,郭会娟.基于ADAMS的塑壳式断路器操作机构可靠性分析[J].低压电器,2010(14):1-4. |
| |
| 作者姓名： | 苏秀苹 任俊勇 刘金鹿 郭会娟 |
| |
| 作者单位： | 河北工业大学,电器研究所,天津,300130 |
| |
| 基金项目： | 河北省自然科学基金资助重大项目 |
| |
| 摘 要： | 使用Pro/E软件建立了塑壳式断路器的三维模型,并通过接口软件导入ADAMS进行了初步分析,根据实际参数完善模型。利用ADAMS的柔性体建模功能建立了操作机构的刚柔耦合模型。通过仿真分析,得到了操作机构关键部件的应力值变化和分布情况,将仿真数据与可靠性设计理论相结合,得出了相关部件的静强度可靠度和疲劳强度可靠度。
|
| 关 键 词： | 塑壳式断路器 可靠性分析 虚拟样机 |
Reliability Analysis of Moulded Case Circuit Breaker Operating Mechanism Based on ADAMS |
| |
| SU Xiuping,REN Junyong,LIU Jinlu,GUO Huijuan.Reliability Analysis of Moulded Case Circuit Breaker Operating Mechanism Based on ADAMS[J].Low Voltage Apparatus,2010(14):1-4. |
| |
| Authors: | SU Xiuping REN Junyong LIU Jinlu GUO Huijuan |
| |
| Affiliation: | SU Xiuping,REN Junyong,LIU Jinlu,GUO Huijuan (Apparatus Research Institute,Hebei University of Technology,Tianjin 300130,China) |
| |
| Abstract: | The three-dimensional model of moulded case circuit breaker was estabished based on Pro/E software and was imported to ADAMS through interface software. After a preliminary analysis,the model was refined with the actual parameters. The rigid-flexible coupling model of operating mechanism was set up through the modeling functions of ADAMS flexible body. Simulation analysis showed the stress value change and distribution on the key components of operating mechanism. The static strength and fatigue reliability... |
| |
| Keywords: | moulded case circuit breaker(MCCB) reliability analysis virtual prototyping |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
