| 中压交联聚乙烯电缆预制式接头施工工艺改进 |
| |
| 引用本文： | 陶鹏.中压交联聚乙烯电缆预制式接头施工工艺改进[J].供用电,2010,27(3):54-56. |
| |
| 作者姓名： | 陶鹏 |
| |
| 作者单位： | 上海市电力公司市区供电公司,上海,200080 |
| |
| 摘 要： | 10 kV交联聚乙烯电缆预制式接头的结构设计存在缺陷,易引发电缆故障,但可以通过施工工艺的改进予以解决。介绍了该预制式接头的基本结构、施工过程以及对其典型故障原因进行的试验性分析。针对该接头因其结构缺陷而引起故障这一根本原因,改进了接头的施工工艺,取得了良好的效果。
|
| 关 键 词： | 预制式电缆接头 中压电缆 施工工艺 |
Improvement in the Construction Craft of Prefabricated Joint for Middle-voltage Cross-linked Polyethylene (XLPE) Cable |
| |
| TAO Peng.Improvement in the Construction Craft of Prefabricated Joint for Middle-voltage Cross-linked Polyethylene (XLPE) Cable[J].Distribution & Utilization,2010,27(3):54-56. |
| |
| Authors: | TAO Peng |
| |
| Affiliation: | TAO Peng (Urban Power Supply Company of SMEPC,Shanghai 200080,Shanghai China) |
| |
| Abstract: | Structure design defect existing in the prefabricated joint of 10 kV XLPE cable probably causes cable fault,but the defect can be solved with the improvement of the joint construction craft.The basic structure of the prefabricated joint and its construction procedure,as well as testing analysis of its typical fault cause are described.Focused on the basic cause of the joint structure defect,the improvement in the joint construction craft achieves good effect. |
| |
| Keywords: | prefabricated cable joint middle-voltage cable construction craft |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
