首页 | 本学科首页   官方微博 | 高级检索  
     

宽带固态功率放大器的设计及实现
引用本文:朱洪伟,黄宁,诸建平. 宽带固态功率放大器的设计及实现[J]. 电子测量与仪器学报, 2009, 23(Z1): 184-186
作者姓名:朱洪伟  黄宁  诸建平
作者单位:上海微波设备研究所,上海,201802
摘    要:宽带固态功率功率放大器是固态发射机中的关键部件,广泛应用于软件无线电电台、有源相控阵雷达、综合化航空电子设备等领域中。以一款新研制的S波段宽带固态功率放大器为例,介绍了超宽带固态功率放大器的设计理论和方法,并用微波仿真软件ADS对功率管的输入、输出阻抗匹配电路及其偏置电路进行优化仿真设计。通过制作并测试此放大器,验证了该设计方法的可行性。最后,给出了测试数据它在2GHz~4 GHz的频带范围内,输入功率为25mW时,输出功率大于10W,带内功率起伏小于1.5dB。

关 键 词:宽带  固态功率放大器  匹配网络  固态发射机

Design and fabrication of solid broadband power amplifier
Zhu Hongwei,Huang Ning,Zhu Jianping. Design and fabrication of solid broadband power amplifier[J]. Journal of Electronic Measurement and Instrument, 2009, 23(Z1): 184-186
Authors:Zhu Hongwei  Huang Ning  Zhu Jianping
Affiliation:Shanghai Research Institute of Microwave Devices 201802
Abstract:Multi-octaves broadband solid-state power amplifier is key component of broadband solid-state transmitters,which is widely used in Software Radio,active phase-controlled radar array and synthesized aviation electronic equipments.Combined with a newly developed S-band solid state power amplifier,design theories and methods of broadband solid state power amplifier are introduced.The input/output impedance matching circuits and bias circuits of GaN HEMT are optimized by using microwave simulation software.The ...
Keywords:Broadband  Solid-State power amplifier  Matching Network  Solid-State transmitter  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号