首页 | 本学科首页   官方微博 | 高级检索  
     

光电信号参数的动态提取方法
引用本文:吴永芝,佘容红,李兴红,万秋华.光电信号参数的动态提取方法[J].电子测量与仪器学报,2009,23(5):69-73.
作者姓名:吴永芝  佘容红  李兴红  万秋华
作者单位:1. 中国科学院长春光学精密机械与物理研究所,长春,130033;中国科学院研究生院,北京,100039
2. 中国科学院长春光学精密机械与物理研究所,长春,130033
3. 成都理工大学工程技术学院,四川,614007
摘    要:光电编码器在运动状态下输出的实际信号与理想的正弦波或三角波存在着偏差,在此偏差信号的基础上进行电子学细分就会产生细分误差。通过对动态波形数据直接进行运动状态分析,通过建立运动模型的方法,确定传感器的原始位置波形参数。将得到的波形参数带入细分误差公式,即可以求取细分误差,并为误差补偿提供了理论基础。此法作为一种新的误差检测方法,适用于现场编码器精度检测和校准。本方法克服了传统误差检测方法装置复杂,不适合现场环境复杂条件下的动态检测的缺陷,有很高的应用价值。

关 键 词:编码器  细分  误差

Dynamic extracting method of photoelectric signal parameters
Wu Yongzhi,She Ronghong,Li Xinghong,Wan Qiuhua.Dynamic extracting method of photoelectric signal parameters[J].Journal of Electronic Measurement and Instrument,2009,23(5):69-73.
Authors:Wu Yongzhi  She Ronghong  Li Xinghong  Wan Qiuhua
Affiliation:1. Changchun Institute of Optics;Fine Mechanics and Physics;the Chinese Academy of Sciences;Changchun 130033;China;2. Graduate School of the Chinese Academy of Sciences;Beijing 100039;3. College of Engineering and Technique;Chengdu University of Technology;Sichuan 6140074;China
Abstract:Under working at the dynamic state, there are deviations between the actual output signals of photoelec-tric encoder and the original outputs, in theory which are two sine or triangular signals. Interpolating on this deviation, signal will result in interpolation errors. Analyzing the dynamic status of the original signal data, building the dynamic model, the original waveform-parameters can be obtained. Bring these parameters into interpolation error equation, the errors can be worked out, which provides a...
Keywords:photoelectric encoder  interpolation  error  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号