首页 | 本学科首页   官方微博 | 高级检索  
     

常压空气质子交换膜燃料电池
引用本文:孙佰文,李丹,徐洪峰,戚鹏,林治银,赵恩介.常压空气质子交换膜燃料电池[J].电源技术,2005,29(6):399-401.
作者姓名:孙佰文  李丹  徐洪峰  戚鹏  林治银  赵恩介
作者单位:大连新源动力股份有限公司,辽宁,大连,116025;大连新源动力股份有限公司,辽宁,大连,116025;大连新源动力股份有限公司,辽宁,大连,116025;大连新源动力股份有限公司,辽宁,大连,116025;大连新源动力股份有限公司,辽宁,大连,116025;大连新源动力股份有限公司,辽宁,大连,116025
摘    要:常压空气质子交换膜燃料电池,采用阴极与阳极均为平行沟槽流场的石墨双极板。MEA采用DuPond公司制造的Nafion112质子交换膜、碳纸采用SGL碳纸,碳载铂为自制催化剂。电池堆的工作条件为室温,氢气压力为0.01~0.02MPa,以空气为氧化剂。电池堆输出功率为200W,峰值功率400W。

关 键 词:燃料电池  电池堆  质子交换膜燃料电池
文章编号:1002-087X(2005)06-0399-03
修稿时间:2004年8月26日

Development of the ambient pressure proton exchange membrane fuel cell stack
SUN Bai-wen,LI Dan,XU Hong-feng,Qi Peng,LIN Zhi-yin,ZHAO En-jie.Development of the ambient pressure proton exchange membrane fuel cell stack[J].Chinese Journal of Power Sources,2005,29(6):399-401.
Authors:SUN Bai-wen  LI Dan  XU Hong-feng  Qi Peng  LIN Zhi-yin  ZHAO En-jie
Abstract:The ambient pressure proton exchange membrane fuel cell stack was successfully developed with graphite bipolar plate, parallel flow field, Nafion 112 membrane and SGL carbon paper. Carbon supported platinum was made in this company. The operating conditions were 0.01-0.02 MPa /ambient pressure of P(H2)/air with ambient temperature. The output power and peak power of stack are 200 W and 400 W respectively.
Keywords:fuel cell  stack  proton exchange membrane fuel cell(PEMFC)  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号