首页 | 本学科首页   官方微博 | 高级检索  
     

利用单相控制方法实现三相功率因数校正
引用本文:丁坤,牛长清.利用单相控制方法实现三相功率因数校正[J].电力电子技术,2007,41(5):89-91.
作者姓名:丁坤  牛长清
作者单位:河海大学,江苏,南京,210098
基金项目:江苏省工业科技攻关项目
摘    要:分析了常规单相Boost有源功率因数校正电路直接并联存在的相间耦合问题,选用一种采用两个Boost主电感和两个二极管的单相Boost有源功率因数校正主电路,这种单相电路直接并联可以改善相间耦合的问题.每个单相电路采用一片平均电流模式控制芯片UC3854B作为控制核心,电路简单,参数设计方便.仿真和实验结果验证了该方法的可行性.

关 键 词:有源电路  功率因数  校正/相间耦合  平均电流模式
文章编号:1000-100X(2007)05-0089-03
修稿时间:11 13 2006 12:00AM

Three-phase Power Factor Correction using Single-phase Control Method
DING Kun,NIU Chang-qing.Three-phase Power Factor Correction using Single-phase Control Method[J].Power Electronics,2007,41(5):89-91.
Authors:DING Kun  NIU Chang-qing
Affiliation:Hohai University, Nanjing 210098, China
Abstract:The phase interaction among three-phase Active Power Factor Correction(APFC) circuit composed of normal single-phase APFC Boost circuits in parallel is analyzed.A single-phase active power Boost circuit employing two inductors and two diode is adopted,direct parallel connection of this circuit will reduce the phase interaction.A average circuit mode control chip UC3854B is used to control each phase,thus the circuit and parameters are easy to design.The simulative ande experimental results verified its validity.
Keywords:active circuit  power factor  correction/phase interaction  average current mode
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号