首页 | 本学科首页   官方微博 | 高级检索  
     

应用三次样条函数快速计算插值FFT算法
引用本文:孙同明,许珉,杨育霞. 应用三次样条函数快速计算插值FFT算法[J]. 电力自动化设备, 2007, 27(6): 60-62
作者姓名:孙同明  许珉  杨育霞
作者单位:河南工业大学,国际学院,河南,郑州,450052;郑州大学,电气工程学院,河南,郑州,450002
摘    要:加汉宁窗插值快速傅里叶变换(FFT)算法可以克服频谱泄漏的影响,消除用异步采样值测量电量时产生的误差,但其计算量较大,实时性较差。为了减小插值FFT算法的计算量,采用三次样条函数逼近加汉宁窗插值FFT算法函数,提出了应用三次样条函数的有效形式计算插值FFT算法,将插值FFT算法的谐波幅值修正系数曲线分为10段,给定11个等间距插值点,构造出计算插值FFT算法的三次样条函数的快速计算公式。该公式简单,程序实现方便,计算量小,在分段处连续,且为精确值,可以大幅度提高插值FFT算法的计算速度和实时性。仿真计算结果表明,应用三次样条函数的有效形式计算电量谐波幅值和频率,幅值误差小于0.1%,频率误差小于0.01Hz。

关 键 词:三次样条函数  异步采样  频谱泄漏  插值FFT算法
文章编号:1006-6047(2007)06-0060-03
收稿时间:2006-10-24
修稿时间:2006-10-242007-01-19

Fast calculation of interpolated FFT algorithm using cubic spline function
SUN Tong-ming,XU Min,YANG Yu-xia. Fast calculation of interpolated FFT algorithm using cubic spline function[J]. Electric Power Automation Equipment, 2007, 27(6): 60-62
Authors:SUN Tong-ming  XU Min  YANG Yu-xia
Affiliation:1. International College, Henan University of Technology,Zhengzhou 450052,China; 2. College of Electric Engineering, Zhengzhou University,Zhengzhou 450002,China
Abstract:Hanning window interpolated FFT(Fast Fourier Transform) algorithm can overcome the influence of frequency spectrum leakage and eliminate the errors brought by using asynchronous sampling values in electrical parameter measurement,but it needs a large number of computations and has bad real-time performance.In order to reduce its computations,the cubic spline function is adopted to approach Hanning window interpolated FFT algorithm function,the effective form of cubic spline function is put forward to calculate the interpolated FFT algorithm.The harmonic amplitude modification coefficient curve is divided into 10 parts and 11 interpolation points with equal intervals are given to form the fast calculation formula using cubic spline function for Hanning window interpolated FFT algorithm.It is simple and easy to be programmed with less calculations and precise continuous values at interpolation points,and the speed of interpolated FFT algorithm is improved strongly.Simulative calculation results show that,the power harmonic amplitude and frequency calculation using the effective form of cubic spline function has the amplitude error less than 0.1 % and the frequency error less than 0.01 Hz.
Keywords:cubic spline function  asynchronous sampling  spectrum leakage  interpolated FFT algorithm
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《电力自动化设备》浏览原始摘要信息
点击此处可从《电力自动化设备》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号