首页 | 本学科首页   官方微博 | 高级检索  
     

基于UML和Petri网的电力系统恢复模型
引用本文:刘栋,陈允平,沈广,樊友平.基于UML和Petri网的电力系统恢复模型[J].高电压技术,2006,32(6):90-93,121.
作者姓名:刘栋  陈允平  沈广  樊友平
作者单位:武汉大学电气工程学院,武汉,430072
基金项目:国家自然科学基金;湖北省自然科学基金
摘    要:为了描述电力系统恢复过程,提出了基于UML的电力系统恢复过程建模方法,使用类图表示参与电力系统恢复的主要元件的静态特性,使用状态图表示各元件的动态特性。对所建模型进行了仿真和验证,提出了将UML模型转化为赋时Petri网的方法,将UML模型的操作转化为Petri网中的变迁,将UML模型中操作的输入、输出及约束表示为Petri网的库所。以IEEE RTS-96系统验证了所提方法的可行性,该方法易于对电力系统恢复过程进行模型化分析和软件实现。

关 键 词:电力系统恢复  统一建模语言  公用信息模型  赋时Petri网  离散事件动态系统
文章编号:]003-6520(2006)06-0090-04
收稿时间:2005-08-23
修稿时间:2005-08-23

Model for Power System Restoration Based on UML and Petri Net
LIU Dong,CHEN Yunping,SHEN Guang,FAN Youping.Model for Power System Restoration Based on UML and Petri Net[J].High Voltage Engineering,2006,32(6):90-93,121.
Authors:LIU Dong  CHEN Yunping  SHEN Guang  FAN Youping
Affiliation:School of Electrical Engineering, Wuhan University, Wuhan 430072, China
Abstract:The process of Power System Restoration(PSR) contains many asynchronous or synchronous tasks.In order to represent the process of PSR,an approach for Power System Restoration Modeling based on UML is proposed.The class diagram is employed to describe the static characteristic of components involved in PSR,such as generators,buses,lines and loads.State diagram is employed to describe the dynamic characteristic of the components.Operations are defined when the state changes into another state.The operation contains the involved components,the operational constraints and the time needed to fulfill the task.UML is strong as modeling means in software engineering,supplies several different diagrammatic notations for representing the different aspects of a system under development,but lacks simulation and verifiability capabilities.This paper proposes the paring of UML dynamic models with high-level timed Petri nets(HLTPN) to obtain a flexible and customizable means to reason on the dynamic aspects of PSR.In order to simulate and verify the developed model,an algorithm for converting UML to Timed Petri Net is suggested.The operations in UML model are converted into transitions in Petri Net.The inputs,outputs and constraints are converted into places in Petri Net.The token is used to represent the current status of each object.The time characteristic of state diagram is also represent by timed transition in Petri Net.Three time parameters,enable time, holding time and firing time,are defined to represent the detail process when a transition is fired.Several common constraints in PSR are discussed.An example based on IEEE RTS-96 is given to demonstrate the feasibility of the proposed method.The proposed method is suitable for analysis and software realization of PSR model.
Keywords:power system restoration  UML  CIM  timed petri net  discrete event dynamic system
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号