| 基于ARM和MCX314的运动控制模块的设计 |
| |
| 引用本文： | 王典洪,黄小辉,李东明,孙蒙.基于ARM和MCX314的运动控制模块的设计[J].微计算机信息,2007,23(13):144-146. |
| |
| 作者姓名： | 王典洪 黄小辉 李东明 孙蒙 |
| |
| 作者单位： | 430074,湖北武汉,中国地质大学机电学院 |
| |
| 摘 要： | 本文设计了一种基于运动控制芯片MCX314的运动控制模块,并开发了一套NC代码解释程序。通过嵌入式微处理器EB44B0对运动控制芯片MCX314的寄存器和速度参数进行配置,实现对电机的精确控制。通过解释程序使得上位机能够通过标准计算机接口对模块进行NC代码编程。系统具备很高的通用性、灵活性。
|
| 关 键 词： | 嵌入式 标准接口 NC代码 运动控制 |
| 文章编号： | 1008-0570（2007）05-1-0144-03 |
| 修稿时间： | 2007-02-13 |
A Design of Motion Control Module Based on ARM and MCX314 Motion Chip |
| |
| WANG DIANHONG,HUANG XIAOHUI,LI DONGMING,SUN MENG.A Design of Motion Control Module Based on ARM and MCX314 Motion Chip[J].Control & Automation,2007,23(13):144-146. |
| |
| Authors: | WANG DIANHONG HUANG XIAOHUI LI DONGMING SUN MENG |
| |
| Affiliation: | WANG DIANHONG HUANG XIAOHUI LI DONGMING SUN MENG |
| |
| Abstract: | This paper presents a design of motion control module based on MCX314 motion chip, and the design of programs to ex-plain the NC code. The register and the velocity parameter were set by embedded microprocessor chip EB44B0; the electromotor could be controlled precisely after correct configuration. With the explanation program, the motion control module could be set by the upper computer through the standard computer interface with NC code. Experiments show that this system is effective, universal and flexible. |
| |
| Keywords: | embedded Standard interfaces NC code motion control |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
