| 用负阻法实现S波段低相噪压控振荡器设计 |
| |
| 引用本文： | 喻赛萱.用负阻法实现S波段低相噪压控振荡器设计[J].自动化信息,2011(7):39-41. |
| |
| 作者姓名： | 喻赛萱 |
| |
| 作者单位： | 电子科技大学空天技术研究院,成都611731 |
| |
| 摘 要： | 采用分布式微带电路结构和负阻振荡法设计了频率范围为2．4—2．8GHz的压控振荡器（VCO），根据ADS软件进行建模并仿真，确定了VCO的电路参数，同时对振荡器的相位噪声和输出功率等关键参数进行了仿真优化。最终通过对实际制作出的VCO测量，验证了该模型的准确性，频段内的相位噪声达到-90dBc，Hz@10KHz，输出功...
|
| 关 键 词： | 负阻法 压控振荡器 相位噪声 ADS |
Design Implementation of S Waveband Low Phase Noise VCO with the Negative-resistance Method |
| |
| YU Sai-xuan.Design Implementation of S Waveband Low Phase Noise VCO with the Negative-resistance Method[J].Automation Information,2011(7):39-41. |
| |
| Authors: | YU Sai-xuan |
| |
| Affiliation: | YU Sai-xuan (Institute of Astronautics and Aeronautics, University of Electronic Science and Technology of China, Chengdu 611731, China) |
| |
| Abstract: | A VCO （Voltage Controlled Oscillator）with a frequency ranging from 2.4GHz to 2.8GHz is designed by using a distributed resonator with micro-strip circuit elements and negative-reslstance method. Its parameters are determined by adopting Agi- lent software ADS for the modeling and the simulation, and meanwhile, the related key parameters of the oscillator, including phase noise, output power etc, are simulated and optimized. Ultimately, through the test for the actual VCO, the accuracy of the model is verified, and the phase noise within the frequency range achieves 90dBc/Hz@10KHz and output power is -1.61dBm. In the earlier stage of this design, ADS is used for the software simulation, it can immensely shorten the time period of the whole manufacturing process and reduce the making cost of the system. |
| |
| Keywords: | Negative-resistance Method Voltage Controlled Oscillator Phase Noise ADS |
| 本文献已被 维普 等数据库收录！ |
|
