首页 | 本学科首页   官方微博 | 高级检索  
     

基于状态反馈的功率放大器线性化方法
引用本文:钱业青,项国波. 基于状态反馈的功率放大器线性化方法[J]. 计算机仿真, 2010, 27(4): 329-332
作者姓名:钱业青  项国波
作者单位:1. 同济大学信息与通信工程系,上海,200092
2. 武汉理工大学信息学院,湖北,武汉,430070
摘    要:笛卡尔座标反馈线性化技术是减小RF功率放大器非线性失真的一种有效方式,但在高频输入下信号传输延时使系统类似于一高阶系统,严重影响反馈系统的稳定性,一般只适用于窄带系统。为提高系统性能,提出了一种新的状态反馈的线性化技术,并通过二次优化实现参数的优化配置并进行仿真。仿真结果表明通过新方法设计的Cartesian回路增强了系统的稳定性,提高了反馈线性化技术的线性化带宽,而且设计的系统对延时的变化具有较强的鲁棒性。

关 键 词:功率放大器  线性化  状态反馈  二次优化  

Power Amplifier Linearization Method Based on State Feedback
QIAN Ye-qing,XIANG Guo-bo. Power Amplifier Linearization Method Based on State Feedback[J]. Computer Simulation, 2010, 27(4): 329-332
Authors:QIAN Ye-qing  XIANG Guo-bo
Affiliation:1.Department of Information and Communication/a>;Tongji University/a>;Shanghai 200092/a>;China/a>;2.College of Information Engineering/a>;Wuhan University of Technology/a>;Wuhan Hubei 430070/a>;China
Abstract:The Cartesian coordinates feedback technique is among the most effective methods for reducing the distortions generated by the nonlinearities of power-efficient RF amplifiers.However,the linearization bandwidth of this scheme is limited,because the stability of the system is severely affected by its loop time delay.In this paper,a new linearization method base on state feedback and twice optimum was presented.Simulation results demonstrate that proposed method improves the stability of the feedback loop,lin...
Keywords:Power amplifier  Linearization  State feedback  Twice optimum  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号