首页 | 本学科首页   官方微博 | 高级检索  
     

多夹心层蜂窝板动力学特性分析与仿真
引用本文:翟光,杨小平.多夹心层蜂窝板动力学特性分析与仿真[J].计算机仿真,2006,23(8):44-45,85.
作者姓名:翟光  杨小平
作者单位:哈尔滨工业大学深圳研究生院,广东,深圳,518055
基金项目:国家高技术研究发展计划(863计划)
摘    要:蜂窝夹层板广泛的应用在航空航天领域,蜂窝夹层板的动力学特性分析是一重要的课题。由于蜂窝板是一种结构型材料,无法直接给定其物理参数,因此该文首先研究了蜂窝板的三明治等效模型,应用该等效模型对蜂窝板夹芯进等效计算,得到了等效物理参数。利用这些参数建立了多夹心层蜂窝板的有限元模型,完成了不同算例在不同边界条件下的振动仿真,得到了各阶模态频率和振型的可视化仿真结果。将仿真结果与解析解对比说明,等效模型是合理的,且能很方便地处理多夹心层蜂窝板,可进一步推广至其他多夹心层蜂窝板结构的分析当中。

关 键 词:蜂窝夹层  有限元  三明治夹心理论  等效参数  模态分析  动力学仿真
文章编号:1006-9348(2006)08-0044-02
收稿时间:2005-07-20
修稿时间:2005-07-20

Dynamic Analysis and Simulation of Multi-interlayer Honeycomb Plate
ZHAI Guang,YANG Xiao-ping.Dynamic Analysis and Simulation of Multi-interlayer Honeycomb Plate[J].Computer Simulation,2006,23(8):44-45,85.
Authors:ZHAI Guang  YANG Xiao-ping
Affiliation:Harbin Institute of Technology Shenzhen Graduate School, Shenzhen Guangdong 518055,China
Abstract:Dynamic analysis of honeycomb sandwich is a significant task for its wide use in aeronautic and astronautic field. For the parameters of honeycomb sandwich can not be provided directly, in this paper an equivalent method based on sandwich plate theory is deduced and the equivalent parameters of the honeycomb plate are obtained. With these equivalent parameters the multi - interlayer honeycomb plate FEM simulation model is established and FEM mode simulations under different boundary conditions are performed. By comparison with analytic solution, the simulation results proved that the equivalent method is reliable and applicable for multi - interlayer honeycomb structures.
Keywords:Honeycomb plate  Finite element method  Sandwich plate theory  Equivalent parameter  Module analysis  Dynamic simulation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号