首页 | 本学科首页   官方微博 | 高级检索  
     

三维几何造型系统工程图模块的设计
引用本文:彭宇,刘晓强,孙家广.三维几何造型系统工程图模块的设计[J].计算机辅助设计与图形学学报,2002,14(9):848-852.
作者姓名:彭宇  刘晓强  孙家广
作者单位:清华大学计算机科学与技术系,北京,100084
基金项目:国家科技攻关项目 (2 0 0 1BA2 0 1A0 7)资助
摘    要:二维CAD支撑软件系统模型巳经处于成熟的阶段,作为集标准化、智能化为一体的面向图形设计与绘图的集成系统,巳具有良好的互操作性和伸缩性,为了秉承扩张其优点,讨论分析了二维CAD支撑软件系统和三维几何造型系统体系结构和数据结构,并在二维CAD支撑软件系统模型和流程控制机制基础上设计了实现三维几何造型系统中的工程图模块。

关 键 词:三维几何造型系统  工程图模块  设计  特征造型  CAD  工程设计
修稿时间:2002年6月18日

Design of 2D Drawing Module in 3D Solid Modeling System
Peng Yu,Liu Xiaoqiang,Sun Jiaguang.Design of 2D Drawing Module in 3D Solid Modeling System[J].Journal of Computer-Aided Design & Computer Graphics,2002,14(9):848-852.
Authors:Peng Yu  Liu Xiaoqiang  Sun Jiaguang
Abstract:Nowadays 2D CAD System has stood in a steady process as a highly standardized and intelligent tool for design and drafting, nicely provides interoperability and scalability. In this paper, the software architecture and data structure of 2D CAD System pertaining to a native 3D Solid Modeling System is discussed and analyzed. The software architecture of most popular 2D CAD System on market is implanted adaptively into the native 2D system to inherit most of its commonly accepted techniques.
Keywords:event  driven hierarchical frame  2D drawing  feature modeling  interaction between 2D and 3D models
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号