首页 | 本学科首页   官方微博 | 高级检索  
     

基于序列蒙特卡罗方法的3D人体运动跟踪
引用本文:陈睿,刘国翌,赵国英,张俊,李华.基于序列蒙特卡罗方法的3D人体运动跟踪[J].计算机辅助设计与图形学学报,2005,17(1):85-92.
作者姓名:陈睿  刘国翌  赵国英  张俊  李华
作者单位:中国科学院计算技术研究所智能信息处理重点实验室,北京,100080
基金项目:国家重点基础研究发展规划项目(2004CB318000,G1998030608),国家“八六三”高技术研究发展计划项目(2001AA231031),国家科技攻关计划课题奥运科技专项(2001BA904B08)
摘    要:针对人体运动跟踪的特点,在退火粒子滤波方法的基础上,提出基于序列蒙特卡罗方法的3D人体跟踪算法.通过状态空间分解提高了退火系数选择的鲁棒性;同时,在每次退火时采用PERM采样方法,而不是标准的重采样,能在一定程度上抑制观测模型与真实分布之间的误差,从而提高算法的稳定性.通过模拟实验表明,该算法适合3D多关节人体跟踪.

关 键 词:跟踪  随机采样  序列蒙特卡罗  模拟退火  PERM

3D Human Motion Tracking Based on Sequential Monte Carlo Method
Chen Rui,Liu Guoyi,Zhao Guoying,Zhang Jun,Li Hua.3D Human Motion Tracking Based on Sequential Monte Carlo Method[J].Journal of Computer-Aided Design & Computer Graphics,2005,17(1):85-92.
Authors:Chen Rui  Liu Guoyi  Zhao Guoying  Zhang Jun  Li Hua
Abstract:Characterized by its high dimension and multi-modal, the 3D human motion tracking has been a stubborn problem in computer vision for many years. This paper introduces a new sequential Monte Carlo (SMC) method, based on annealed particle filtering, to solve the problem. Firstly, the new method adopts the state space decomposition in conjunction with simulated annealing to improve the annealing efficiency in a comparably lower dimension; next, the PERM sampling after every annealing, instead of standard resampling, is used to compensate the error between the observation model and the true target distribution. At the end of this paper, a simulated experiment is given to show that our improved SMC-based method is capable of tracking 3D articulated human.
Keywords:tracking  random sampling  sequential Monte Carlo  simulated annealing  PERM
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号