首页 | 本学科首页   官方微博 | 高级检索  
     

硅微压电超声换能器的设计与制作
引用本文:郝震宏,汤亮,乔东海,汪承灏.硅微压电超声换能器的设计与制作[J].传感技术学报,2006,19(5):2272-2275.
作者姓名:郝震宏  汤亮  乔东海  汪承灏
作者单位:中国科学院声学研究所,北京,100080
摘    要:介绍了一种用ZnO薄膜作为压电层的硅微压电式超声换能器(PMUT).该硅微压电换能器的振动基膜采用LPCVD制作的氮化硅薄膜和PECVD制作的二氧化硅形成的复合振动膜结构.文中运用有限元方法对该硅微压电换能器的结构进行了模拟和计算,并进行了预应力对硅微换能器共振频率的影响的分析.实验测得硅微压电式换能器的共振频率为71.36 kHz.本文还使用该硅微超声换能器在油中进行了初步的共振频率点收发信号的实验,接收实验测得信号峰峰值为9 mV左右,发射实验标准水听器接收信号峰峰值为0.8 mV左右.

关 键 词:声成像  硅微压电超声换能器  ZnO压电薄膜  复合振动膜  预应力分析
文章编号:1004-1699(2006)05-2272-04
修稿时间:2006年7月1日

Development and Analysis of Piezoelectric Micro-machined Ultrasonic Transducers in Silicon Substrate
HAO Zhen-hong,TANG Liang,QIAO Dong-hai,WANG Cheng-hao.Development and Analysis of Piezoelectric Micro-machined Ultrasonic Transducers in Silicon Substrate[J].Journal of Transduction Technology,2006,19(5):2272-2275.
Authors:HAO Zhen-hong  TANG Liang  QIAO Dong-hai  WANG Cheng-hao
Abstract:This paper presents the design, analysis and fabrication of piezoelectric micro-machined ultrasonic transducers (PMUT) widely used in acoustic imaging field. The transducer consists of piezoelectric ZnO thin film and the composite membrane composed of Si_3N_4 and LTO. The simulation of the micro-machined piezoelectric transducer has been made by the FEM method, which includes the analysis of the pre-stress effect on the resonant frequency of the transducers. Experiment results indicate the resonant frequency of the micro-machined piezoelectric transducer is 71 kHz. The micro-machined piezoelectric transducer is primarily tested as the transducer and the receiver at the resonant frequency in the oil tank. Its received signal is about 9 mV. When it is used as the transmitter, the received signal of standard hydrophone is about 0.8 mV.
Keywords:acoustic image  piezoelectric micro-machined ultrasound transducer  piezoelectric ZnO film  composite membrane  pre-stress analysis
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《传感技术学报》浏览原始摘要信息
点击此处可从《传感技术学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号