| 高灵敏压力传感器过载保护结构设计 |
| |
| 引用本文： | 揣荣岩,孙瑞,刘晓为,王建.高灵敏压力传感器过载保护结构设计[J].传感技术学报,2011,24(5):675-678. |
| |
| 作者姓名： | 揣荣岩 孙瑞 刘晓为 王建 |
| |
| 作者单位： | 沈阳工业大学信息科学与工程学院;哈尔滨工业大学MEMS中心; |
| |
| 基金项目： | 国家自然科学基金项目(60776049); 辽宁省教育厅创新团队项目(2007T130) |
| |
| 摘 要： | 采用微机电系统(MEMS)牺牲层技术制作的压力传感器具有芯片尺寸小,灵敏度高的优势,但同时也带来了提高过载能力的难题.为此,利用有限元法,对牺牲层结构压阻式压力传感器弹性膜片的应力分布进行了静态线性分析和非线性接触分析.通过这两种分析方法的结合,准确的模拟出过载状态下传感器的应力分布.在此基础上给出了压力传感器的一种结...
|
| 关 键 词： | 压力传感器 牺牲层技术 过载保护 非线性接触 |
Overload protection design of high-sensitivity pressure sensor |
| |
| CHUAI Rongyan,SUN Rui,LIU Xiaowei,WANG Jian.Overload protection design of high-sensitivity pressure sensor[J].Journal of Transduction Technology,2011,24(5):675-678. |
| |
| Authors: | CHUAI Rongyan SUN Rui LIU Xiaowei WANG Jian |
| |
| Affiliation: | CHUAI Rongyan1,SUN Rui1,LIU Xiaowei2,WANG Jian1 1.School of Information Science and Engineering,Shenyang University of Technology,Shenyang 110870,China,2.MEMS Center,Harbin Institute of Technology,Harbin 150001 |
| |
| Abstract: | In microelectromechanical systems(MEMS),the pressure sensor made by the sacrificial layer technique has advantages such as small chip size and high sensitivity,which nevertheless results in the difficulty to increase the overload ability.Thus,the stress distribution on the elastic thin film of the sacrificial layer piezoresistive pressure sensor was simulated and analyzed by the finite-element analysis using both static linear and nonlinear contact methods.Through the combination of these two methods,the st... |
| |
| Keywords: | pressure sensor sacrificial layer technology overload protection nonlinear contact |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《传感技术学报》浏览原始摘要信息 |
|
点击此处可从《传感技术学报》下载全文 |
|
