| Cr薄膜的沉积与湿法刻蚀工艺研究 |
| |
| 引用本文： | 李兆泽,徐超,吴学忠,万红 李圣怡.Cr薄膜的沉积与湿法刻蚀工艺研究[J].传感技术学报,2006,19(5):1437-1440. |
| |
| 作者姓名： | 李兆泽 徐超 吴学忠 万红 李圣怡 |
| |
| 作者单位： | 1. 国防科技大学机电工程与自动化学院,长沙,410073
2. 国防科技大学航天与材料工程学院,长沙,410073 |
| |
| 摘 要： | 通过台阶仪和扫描电镜、原子力显微镜测试观察了PVD方法制作Cr薄膜的溅射速率和表面形貌,实验分析了相关工艺参数对溅射速率的影响情况,并对薄膜的湿法刻蚀工艺进行了初步研究.同时给出了Cr膜与其腐蚀后的电阻图形的显微镜照片.
|
| 关 键 词： | PVD 薄膜 湿法刻蚀 台阶仪 扫描电镜 原子力显微镜 |
| 文章编号： | 1004-1699(2006)05-1437-04 |
| 修稿时间： | 2006年7月1日 |
A Study on Cr Thin Films Depositing and its Wet-etching |
| |
| Li Zhaoze,Xu Chao,Wu Xuezhong,Wan Hong,Li Shengyi.A Study on Cr Thin Films Depositing and its Wet-etching[J].Journal of Transduction Technology,2006,19(5):1437-1440. |
| |
| Authors: | Li Zhaoze Xu Chao Wu Xuezhong Wan Hong Li Shengyi |
| |
| Affiliation: | 1. School of mechatronic engineering and Automation, National University of Defense Technology,Changsha 410073 )
(2. School of Aerospace and Material Engineering, National University of Defense Technology, Changsha 410073 |
| |
| Abstract: | Cr thin film has been deposited by PVD process. The sputtering rate of Cr thin-film is measured by step Profiler and its surface is observed on SEM and AFM. The influence of some different factors to the sputtering rate is educed based on the experiments. And some Preliminary Studies have been done to the wet-etching of the thin film. At the same time, the microscope picture of the Cr thin film and the resistance of Cr after wet-etching are shown. |
| |
| Keywords: | PVD |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《传感技术学报》浏览原始摘要信息 |
|
点击此处可从《传感技术学报》下载全文 |
