首页 | 本学科首页   官方微博 | 高级检索  
     

基于HOST LINK协议的FINS通信
引用本文:陈大程,徐世许,柳仁松.基于HOST LINK协议的FINS通信[J].工业控制计算机,2012,25(5):16-17.
作者姓名:陈大程  徐世许  柳仁松
作者单位:青岛大学自动化工程学院,山东青岛,266071
摘    要:上位机与欧姆龙PLC串行通信时,通常使用HOST LINK协议,但HOST LINK协议只能通信4位及4位以下地址数据。如果需要通信4位以上地址数据,可使用FINS协议。FINS是欧姆龙公司开发的用于工业自动化的串口通信和网络通信的协议。介绍了FINS用于串口通信时的数据帧格式,并在Visual Basic的可视化开发环境下,利用MSComm控件开发了具体的通信应用,实现了上位机与PLC内存高地址之间的数据通信。

关 键 词:FINS  Visual  Basic  串口通信  HOST  LINK协议  数据帧

FINS Communication Based on HOST LINK Protocol
Affiliation:Chen Dacheng et al
Abstract:The host-computer communicates with OMRON PLC through serial port,usually using HOST LINK protocol,but HOST LINK command can only deal with memory addresses of four or less than four bits.If it is needed to communicate more than four bit address data,the FINS command can be used.The data frame format of FINS serial communication is introduced,and the concrete communication application under the Visual Basic visualization development environment with MSComm is developed,then data communications between the host-computer and high address of PLC memory have been achieved.
Keywords:FINS  Visual Basic  serial communication  HOST LINK protocol  data frame
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号