| 叠板式多缸薄板成型液压机参数化设计 |
| |
| 引用本文： | 朱振华,李吉萍,张瑞.叠板式多缸薄板成型液压机参数化设计[J].计算机辅助工程,2016,25(5):36-40. |
| |
| 作者姓名： | 朱振华 李吉萍 张瑞 |
| |
| 作者单位： | 兰州兰石能源装备工程研究院有限公司;兰州兰石能源装备工程研究院有限公司;兰州兰石能源装备工程研究院有限公司 |
| |
| 摘 要： | 在已有的300 MN多缸薄板成型液压机的基础上，运用基于VB的SolidWorks二次开发方法与自顶向下完全建模技术，通过驱动模型关键尺寸参数，对新产品进行参数化设计，并用ANSYS仿真优化.通过参数化设计可使该类产品系列化，提高新产品研发速度，促进该类型产品的国产化.
|
| 关 键 词： | 多缸薄板成型液压机 产品系列化 尺寸驱动设计 自顶向下建模 二次开发 有限元 |
| 收稿时间： | 2016/4/14 0:00:00 |
| 修稿时间： | 2016/6/20 0:00:00 |
Parametrization design on laminated plate multi-cylinder plate forming hydraulic press |
| |
| ZHU Zhenhu,LI Jiping and ZHANG Rui.Parametrization design on laminated plate multi-cylinder plate forming hydraulic press[J].Computer Aided Engineering,2016,25(5):36-40. |
| |
| Authors: | ZHU Zhenhu LI Jiping and ZHANG Rui |
| |
| Affiliation: | Lanzhou Lanshi Energy Equipment Engineering Institute Co., Ltd.;Lanzhou Lanshi Energy Equipment Engineering Institute Co., Ltd.;Lanzhou Lanshi Energy Equipment Engineering Institute Co., Ltd. |
| |
| Abstract: | The parametrization design is carried out on a new hydraulic press, which is based on a 300 MN multi cylinder plate forming hydraulic press. The secondary development of SolidWorks based on VB and the top down completely modeling method is used to change the key size parameters of the model, and the new product is simulated and optimized by ANSYS. The parametrization design can serialize this kind of product, speed up the research and design, and promote its localization. |
| |
| Keywords: | multi-cylinder plate forming hydraulic press product serialization dimension driven design top down modeling secondary development finite element |
|
| 点击此处可从《计算机辅助工程》浏览原始摘要信息 |
|
点击此处可从《计算机辅助工程》下载全文 |
