| 内置转子换热管强化传热数值模拟 |
| |
| 引用本文： | 张震,杨卫民,韩崇刚,阎华,杨斯博,赵本华.内置转子换热管强化传热数值模拟[J].计算机辅助工程,2011,20(2):57-62. |
| |
| 作者姓名： | 张震 杨卫民 韩崇刚 阎华 杨斯博 赵本华 |
| |
| 作者单位： | 北京化工大学机电工程学院,北京,100029 |
| |
| 基金项目： | 北京市自然科学基金（3102023） |
| |
| 摘 要： | 为分析内置转子换热管的传热效果,建立光管和内置转子换热管的三维模型,对换热管内流场、温度场、压力场以及传热过程进行模拟,得到管内流体的阻力特性和传热特性.模拟结果表明:内置转子换热管内的三维流动比较复杂,转子与管壁之间缝隙内的流体有明显的环绕流动,切向速度和径向速度也增大到一定范围；相同雷诺数条件下,内置转子换热管压降...
|
| 关 键 词： | 内置转子换热管 强化传热 压降 数值模拟 |
| 收稿时间： | 3/7/2011 12:00:00 AM |
| 修稿时间： | 3/7/2011 12:00:00 AM |
Numerical simulation on enhanced heat transfer of heat exchange tube with assembled rotors |
| |
| zhangzhen,yangweimin,hanchonggang,yanhu,yangsibo and zhaobenhua.Numerical simulation on enhanced heat transfer of heat exchange tube with assembled rotors[J].Computer Aided Engineering,2011,20(2):57-62. |
| |
| Authors: | zhangzhen yangweimin hanchonggang yanhu yangsibo and zhaobenhua |
| |
| Affiliation: | College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology,College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology,College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology,College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology,College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology,College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology |
| |
| Abstract: | To analyze the heat transfer effect of heat-exchange tube with assembled rotors,the 3D models of a plain tube and a heat-exchange tube with assembled rotors are established,the flow field,temperature field,pressure field and process of heat transfer in the tubes are simulated,and the flow and heat transfer characteristics of the tubes are obtained.The simulation results indicate that the circular flow between rotors and tube wall is obvious,the tangential velocity and radial velocity increase to some extent,so the 3D flow in the heat-exchnge tube with assembled rotors is very complex;under the same Reynolds numbers,the pressure drop and temperature difference between inlet and outlet of the heat-exchange tube with assembled rotors increase to 2.09~2.66 times and 0.67~0.76 ℃ than those of plain tube.The heat-exchange tube with assembled rotors achieves stronger turbulence intensity than the plain tube,especially in the near-wall region.Therefore,the convective heat transfer is enhanced and the heat transfer coefficient is increased,and the rotors are proved to be with enhanced heat transfer function. |
| |
| Keywords: | heat-exchange tube with assembled rotors enhanced heat transfer pressure drop numerical simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《计算机辅助工程》浏览原始摘要信息 |
|
点击此处可从《计算机辅助工程》下载全文 |
|
