| 基于MSC Nastran/Patran的装船机
金属结构有限元分析 |
| |
| 引用本文： | 李志建,刘晋川.基于MSC Nastran/Patran的装船机
金属结构有限元分析[J].计算机辅助工程,2007,16(4):7-10. |
| |
| 作者姓名： | 李志建 刘晋川 |
| |
| 作者单位： | 交通部,水运科学研究院,北京,100088 |
| |
| 摘 要： | 为合理设计装船机金属结构,利用MSC Nastran/Patran对其进行有限元分析.探讨对包含轴承、滑轮等部件的复杂金属结构模型的简化技巧,在MSC Patran平台上建立装船机整体模型.利用MSC Nastran进行强度和刚度分析计算,并利用其结果调整设计方案.通过装船机结构计算结果与设计方案的互动,在满足规范要求的基础上,合理布局并选择型材,减轻整机重量,提升总体设计水平.
|
| 关 键 词： | 装船机 金属结构 有限元 MSC Nastran MSC Patran Nastran Patran 装船机 金属 结构有限元分析 based metal structure element analysis 设计水平 整机重量 型材 选择 布局 规范要求 结构计算 设计方案 调整 结果 分析计算 强度和刚度 |
| 文章编号： | 1006-0871（2007）04-0007-04 |
| 收稿时间： | 2007-03-07 |
| 修稿时间： | 2007-04-04 |
Finite element analysis on metal structure of
ship-loader based on MSC Nastran/Patran |
| |
| LI Zhijian and LIU Jinchuan.Finite element analysis on metal structure of
ship-loader based on MSC Nastran/Patran[J].Computer Aided Engineering,2007,16(4):7-10. |
| |
| Authors: | LI Zhijian and LIU Jinchuan |
| |
| Affiliation: | Waterborne Transportation Institute,Ministry of Communications of PRC,Beijing 100088, China;Waterborne Transportation Institute,Ministry of Communications of PRC,Beijing 100088, China |
| |
| Abstract: | To design the metal structure of ship-loader rationally, finite element analysis is done on it using MSC Nastran/Patran. The technique to simplify complicated metal structure included bearing, chain wheel, and so on is discussed. The whole model of entire structure is built on MSC Patran plat- form. The intensity and stiffness are analyzed and calculated by MSC Nastran. And the results are used to adjust design scheme. By the interaction of the calculated results and design scheme, the profiled bar is selected rationally and its layout is optimized, the total mass is reduced, and the design level is improved based on the requirements of related specifications. |
| |
| Keywords: | ship-loader metal structure finite element MSC Nastran MSC Patran |
| 本文献已被 维普 万方数据 等数据库收录！ |
| 点击此处可从《计算机辅助工程》浏览原始摘要信息 |
|
点击此处可从《计算机辅助工程》下载全文 |
|
