| 集成上层建筑开口群力学性能分析 |
| |
| 引用本文： | 王龙侃,祝祥刚,陈舸,刘莹.集成上层建筑开口群力学性能分析[J].计算机辅助工程,2013,22(Z2):274-279. |
| |
| 作者姓名： | 王龙侃 祝祥刚 陈舸 刘莹 |
| |
| 作者单位： | 哈尔滨工程大学 船舶工程学院;哈尔滨工程大学 船舶工程学院;哈尔滨工程大学 船舶工程学院;哈尔滨工程大学 船舶工程学院 |
| |
| 基金项目： | 国家自然科学基金重点项目(50939002) |
| |
| 摘 要： | 针对船舶上层建筑的多种复杂开口群结构形式,用Abaqus进行数值模拟,得到各工况开口区域的振动频率以及在抨击载荷与惯性力载荷作用下的最大von Mises应力和最大位移.给出开口位置、开口尺寸和开口排列方式等情况对结构强度与刚度的影响规律.结果表明,最大von Mises应力和最大位移均出现在过渡面与舷侧的顶部交际处,最大von Mises应力大小在70~90 MPa,最大位移约为5 mm.
|
| 关 键 词： | 集成上建 开口群 振动频率 von Mises应力 |
| 收稿时间： | 9/4/2013 12:00:00 AM |
Mechanical properties of opening group of integrated superstructure |
| |
| WANG Longkan,ZHU Xianggang,CHEN Ge and LIU Ying.Mechanical properties of opening group of integrated superstructure[J].Computer Aided Engineering,2013,22(Z2):274-279. |
| |
| Authors: | WANG Longkan ZHU Xianggang CHEN Ge and LIU Ying |
| |
| Affiliation: | College of Shipbuilding Engineering, Harbin Engineering University;College of Shipbuilding Engineering, Harbin Engineering University;College of Shipbuilding Engineering, Harbin Engineering University;College of Shipbuilding Engineering, Harbin Engineering University |
| |
| Abstract: | Abaqus is used to simulate many complex structural styles of opening group. Then the vibration frequency of opening area in different cases are obtained, as well as the maximum von Mises stress and the maximum displacement under slamming loads and inertial force. In addition, the influencing factors are considered, such as opening position, aperture size, and arrangement of openings. Then the effect on the structural strength and stiffness is discussed. It is concluded that von Mises stress and displacement turns to be the maximum at the connection between transition surface and top side plate. Besides, the maximum von Mises stress is between 70 and 90 MPa, and the maximum displacement is about 5 mm. |
| |
| Keywords: | integrated superstructure opening group vibration frequency von Mises stress |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《计算机辅助工程》浏览原始摘要信息 |
|
点击此处可从《计算机辅助工程》下载全文 |
|
