| 基于结构拓扑优化方法的发动机支架轻量化设计 |
| |
| 引用本文： | 温世杰.基于结构拓扑优化方法的发动机支架轻量化设计[J].计算机辅助工程,2008,17(4):51-54. |
| |
| 作者姓名： | 温世杰 |
| |
| 作者单位： | 1. 中国北方发动机研究所,山西,大同,037036
2. 北京理工大学,机械与车辆工程学院,北京,100081 |
| |
| 摘 要： | 为实现某发动机支架轻量化设计,在支架总成整体结构有限元分析的基础上,运用等效刚度原则建立支架局部有限元模型,得到不同工况下的支架位移分布结果.基于TOSCA软件,通过提取结构分析结果对支架结构拓扑优化模型进行敏度分析并形成优化模型列式.优化求解后,在每轮循环迭代中将新的单元密度值重新赋予结构模型,直至满足预先给定的收敛判定条件;设置过滤半径和各类制造加工约束,消除结构拓扑优化中的数值不稳定性问题,改善优化结果的可加工性.对优化前后的计算结果进行对比分析.
|
| 关 键 词： | 发动机支架 轻量化设计 连续体结构 结构拓扑优化 变密度法 棋盘格现象 有限元分析 |
| 收稿时间： | 2008/4/10 0:00:00 |
| 修稿时间： | 9/8/2008 12:00:00 AM |
Light weight design on engine support based on structural topology optimization method |
| |
| WEN Shijie.Light weight design on engine support based on structural topology optimization method[J].Computer Aided Engineering,2008,17(4):51-54. |
| |
| Authors: | WEN Shijie |
| |
| Affiliation: | WEN Shijie1,LONG Kai2(1.China North Engine Research Institute,Datong Shanxi 037036,China,2.School of Mechanical & Vehicular Eng.,Beijing Institute of Tech.,Beijing 100081,China) |
| |
| Abstract: | To implement the light-weight design for an engine support,the finite element model of its local support is established based on the global structure finite element analysis of support assembly according to equal rigidity principle,and the support displacement distribution results under different loading cases are obtained.The sensitivity analysis is done on structure topology optimization model of support by extracting the structural analysis of TOSCA,and the optimization model formulations are obtained.Af... |
| |
| Keywords: | TOSCA |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《计算机辅助工程》浏览原始摘要信息 |
|
点击此处可从《计算机辅助工程》下载全文 |
|
