首页 | 本学科首页   官方微博 | 高级检索  
     

基于nRF24L01的超低功耗无线传感器网络节点设计
引用本文:曾勇,杨涛,冯月晖. 基于nRF24L01的超低功耗无线传感器网络节点设计[J]. 电子技术应用, 2008, 34(7)
作者姓名:曾勇  杨涛  冯月晖
作者单位:西南科技大学信息工程学院,四川,绵阳,621010;西南科技大学信息工程学院,四川,绵阳,621010;西南科技大学信息工程学院,四川,绵阳,621010
摘    要:基于低功耗nRF24L01无线收发器和MSP430F449单片机,采用短时突发式无线发射技术和低功耗休眠机制,设计一种超低功耗的传感器节点。测量结果表明,在电源电压为3.3V、平均数据率为1kb/s、发送功率为OdBmW、传输距离为10m、误帧率为0.12%时,本系统平均功耗约42μW,可以应用于光照、振动、热和气流等环境能量供电的无线传感器网络。

关 键 词:无线传感器网络  低功耗  nRF24L01  MSP430F449

Ultra-low power wireless sensor network node design based on nRF24L01
ZENG Yong,YANG Tao,FENG Yue Hui. Ultra-low power wireless sensor network node design based on nRF24L01[J]. Application of Electronic Technique, 2008, 34(7)
Authors:ZENG Yong  YANG Tao  FENG Yue Hui
Affiliation:ZENG Yong YANG Tao FENG Yue Hui (School of Informantion Engineering,Southwest University of Science , Technology,Mianyang 621010,China)
Abstract:Based on low-power wireless transceiver chip nRF24L01 and low-power microcontroller MSP430F449,an ultra- low-power sensor node was designed using bursty transmission technology and low-power sleep mechanism.Measurement results show that the system power consumption is about 421μW under 3.3V power supply,1kb/s average data rate and 0dBmW transmis- sion power.The frame error ratio is 0.12% when the transmission distance is 10 meters indoors.This system can be used in wire- less sensor networks powered by ambient light,vibrations,heat or airflow.
Keywords:nRF24L01  MSP430F449
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号