| 基于聚焦形貌恢复的矿用截齿磨损测量系统 |
| |
| 引用本文： | 李宁,丁华,王义亮.基于聚焦形貌恢复的矿用截齿磨损测量系统[J].工矿自动化,2019(1):100-103. |
| |
| 作者姓名： | 李宁 丁华 王义亮 |
| |
| 作者单位： | 太原理工大学机械工程学院;煤矿综采装备山西省重点实验室 |
| |
| 基金项目： | 山西省科技基础条件平台项目(201805D141002);山西省自然科学基金项目(201601D011050);山西省研究生联合培养基地人才培养项目(2018JD15) |
| |
| 摘 要： | 针对现有截齿磨损测量方法存在过程繁琐、精度低和成本高等问题,设计了一种基于聚焦形貌恢复的矿用截齿磨损测量系统。该系统利用聚焦形貌恢复技术对采集的截齿顶部圆锥序列图像进行处理,获得截齿顶部圆锥三维形貌恢复图,在此基础上得到截齿顶部圆锥表面的深度信息,从而计算出截齿顶部圆锥体积,并结合差值法得出截齿磨损体积。测试结果表明,该系统测量精确度达97.68%。
|
| 关 键 词： | 煤炭开采 截齿磨损 磨损体积测量 聚焦形貌恢复 三维形貌恢复 |
Mine-used pick wear measurement system based on shape from focus |
| |
| LI Ning,DING Hua,WANG Yiliang.Mine-used pick wear measurement system based on shape from focus[J].Industry and Automation,2019(1):100-103. |
| |
| Authors: | LI Ning DING Hua WANG Yiliang |
| |
| Affiliation: | (College of Mechanical Engineering, Taiyuan University of Technology, Taiyuan 030024, China;Shanxi Key Laboratory of Fully Mechanized Coal Mining Equipment, Taiyuan 030024, China) |
| |
| Abstract: | LI Ning;DING Hua;WANG Yiliang(College of Mechanical Engineering, Taiyuan University of Technology, Taiyuan 030024, China;Shanxi Key Laboratory of Fully Mechanized Coal Mining Equipment, Taiyuan 030024, China) |
| |
| Keywords: | coal mining pick wear wear volume measurement shape from focus 3D shape recovery |
| 本文献已被 CNKI 维普 等数据库收录！ |
