首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于正侧视模型的机载双天线干涉SAR外定标方法
引用本文:张薇,向茂生,吴一戎.基于正侧视模型的机载双天线干涉SAR外定标方法[J].遥感技术与应用,2008,23(3):346-350.
作者姓名:张薇  向茂生  吴一戎
作者单位:(1.中国科学院电子学研究所微波成像技术国家重点实验室,北京 100190;; 2.中国科学院研究生院,北京 100039)
基金项目:国家高技术研究发展计划(863计划)
摘    要:采用基于敏感度方程的方法,研究了基于正侧视成像模型下的机载双天线干涉SAR系统的外定标问题。算法通过对干涉成像方程各参数求导,得到基于敏感度方程的误差模型,并在此基础上,依据若干地面控制点的精确数据,求解干涉参数偏差。通过迭代求解,得到定标后的干涉参数,并生成精确的数字高程模型及对地面目标点进行定位。利用我国自主设计、研制的机载干涉SAR系统获得的数据,进行了外定标处理实验,验证了方法的有效性。

关 键 词:干涉合成孔径雷达(合成孔径雷达干涉测量)  外定标  敏感度方程  地面控制点  

Studies on outside Calibration Method Based on the Boresight Model for Dual-antenna Airborne Interferometric SAR
ZHANG Wei,XIANG Mao-sheng,WU Yi-rong.Studies on outside Calibration Method Based on the Boresight Model for Dual-antenna Airborne Interferometric SAR[J].Remote Sensing Technology and Application,2008,23(3):346-350.
Authors:ZHANG Wei  XIANG Mao-sheng  WU Yi-rong
Abstract:Based on the boresight model for the Dual\|antenna Airborne InSAR,the outside calibration was researched by adopting sensitivity equations.The error model based on sensitivity equations was educed by differentiating InSAR imaging equations.Then the biases of interferometric parameters were solved by several accurate Ground Control Points(GCPs). The calibrated interferometric parameters were calculated by iteration method.And the accurate Digital Elevation Model (DEM) was reconstructed.Then the ground points were oriented.A set of InSAR data was adopted to do calibration experiments,which was derived by the Airborne InSAR system researched independently by Institute Of Electronics,Chinese Academy Of Sciences.The experimental results show that this algorithm is efficient.  
Keywords:InSARzz  Outside calibrationzz  Sensitivity equationszz  Ground control pointszz
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《遥感技术与应用》浏览原始摘要信息
点击此处可从《遥感技术与应用》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号