首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于三维重建模型的机载双天线干涉SAR外定标方法及实现
引用本文:张薇,向茂生,吴一戎.基于三维重建模型的机载双天线干涉SAR外定标方法及实现[J].遥感技术与应用,2009,24(1):82-87.
作者姓名:张薇  向茂生  吴一戎
作者单位:1. 中国科学院电子学研究所微波成像技术国家重点实验室,北京,100190;中国科学院研究生院,北京,100039
2. 中国科学院电子学研究所微波成像技术国家重点实验室,北京,100190
基金项目:国家高技术研究发展计划(863计划) 
摘    要:采用三维重建模型,研究了机载双天线干涉SAR系统的外定标问题.算法采用基于敏感度方程的方法,通过对干涉成像方程各参数求导,得到基于敏感度方程的误差模型,在此基础上,依据若干地面控制点的精确数据,求解干涉参数偏差.通过迭代求解,得到定标后的干涉参数,并生成精确的数字高程模型.利用我国自主设计、研制的机载干涉SAR系统获得的数据,进行了外定标处理实验,验证了方法的有效性.

关 键 词:干涉合成孔径雷达(合成孔径雷达干涉测量)  外定标  三维重建模型  敏感度方程  地面控制点

Realization of Outside Calibration Method Based on the Sensitivity Equation for Dual-antenna Airborne Interferometric SAR
ZHANG Wei,XIANG Mao-sheng,WU Yi-rong.Realization of Outside Calibration Method Based on the Sensitivity Equation for Dual-antenna Airborne Interferometric SAR[J].Remote Sensing Technology and Application,2009,24(1):82-87.
Authors:ZHANG Wei  XIANG Mao-sheng  WU Yi-rong
Abstract:The outside calibration for the Dual-antenna Airborne InSAR was researched by 3D reconstruction model.The error model based on sensitivity equations was educed by differentiating InSAR imaging equations based on adopting Sensitivity Equations.Then the biases of interferometric parameters were solved by several accurate Ground Control Points(GCPs). The calibrated interferometric parameters were calculated by iteration method.And the accurate Digital Elevation Model (DEM) was reconstructed.A set of InSAR data was adopted to do calibration experiments,which was derived by the Airborne InSAR system researched independently by Institute of Electronics,Chinese Academy of Sciences.The experimental results show that this algorithm is efficient.
Keywords:   InSARzz  Outside calibrationzz  3D reconstruction modelzz  Sensitivity equationszz  Ground control pointszz
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《遥感技术与应用》浏览原始摘要信息
点击此处可从《遥感技术与应用》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号