首页 | 本学科首页   官方微博 | 高级检索  
     

飞行控制软件测试中插桩技术的优化方法
引用本文:郭君红,李跃飞,白成刚,蔡开元.飞行控制软件测试中插桩技术的优化方法[J].计算机工程,2010,36(4):20-21.
作者姓名:郭君红  李跃飞  白成刚  蔡开元
作者单位:北京航空航天大学自动化科学与电气工程学院,北京,100191
基金项目:国家自然科学基金资助项目(60633010)
摘    要:飞行控制软件主要采用Host-Target的仿真测试模式,并基于插桩技术实现覆盖测试。针对采用传统的程序插桩技术,往往会大量增加程序运行时间,降低程序的实时性甚至导致软件失效的问题,通过分析插桩在程序仿真测试中对程序各阶段执行时间和程序实时性的影响,提出一种优化桩信息传输过程的插桩测试方法。实验结果表明了该方法的有效性。

关 键 词:飞行控制软件  覆盖测试  插桩
修稿时间: 

Optimal Method of Instrumentation Technique in Flight-control Software Test
GUO Jun-hong,LI Yue-fei,BAI Cheng-gang,CAI Kai-yuan.Optimal Method of Instrumentation Technique in Flight-control Software Test[J].Computer Engineering,2010,36(4):20-21.
Authors:GUO Jun-hong  LI Yue-fei  BAI Cheng-gang  CAI Kai-yuan
Affiliation:(School of Automation Science and Electrical Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191)
Abstract:Flight-control software adopts Host-Target simulation test mode and achieves coverage test based on instrumentation. Traditional program instrumentation can increase the executing time greatly and influence the real-time performance then even cause software failure. This paper analyzes the influence of instrumentation in different process of the simulation software test through some experiments. And an optimal method of software test process to the probe information transmission is presented. Experimental results show this method is effective and feasible.
Keywords:flight-control software  coverage test  instrumentation
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《计算机工程》浏览原始摘要信息
点击此处可从《计算机工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号