| 基于FPGA和USB接口的多通道导航信号采集系统设计 |
| |
| 引用本文： | 李豹,曹可劲,许江宁,朱银兵.基于FPGA和USB接口的多通道导航信号采集系统设计[J].计算机测量与控制,2012,20(2):541-543. |
| |
| 作者姓名： | 李豹 曹可劲 许江宁 朱银兵 |
| |
| 作者单位： | 海军工程大学导航工程系,湖北武汉,430033 |
| |
| 摘 要： | 针对无线电导航系统中多通道信号处理需求,设计了一种基于FPGA和USB接口的低成本、快速、和高可靠性的多通道数据采集系统;详细介绍了系统结构以及FPGA控制SRAM芯片实现数据缓存的关键技术,运用FPGA内部的硬件调试工具(SignalTapⅡ)验证了系统数据传输的可靠性能;系统可靠传输速度可达20Mbytes/s,可广泛用于多路、高速信号采集场合,已投入到实际应用。
|
| 关 键 词： | 无线导航 数据采集 FPGA USB SRAM |
Design of Multi-channel Navigation Signal Acquisition System Based on FPGA and USB Interface |
| |
| Li Bao
,
Cao Kejin
,
Xu Jiangning
,
Zhu Yinbing.Design of Multi-channel Navigation Signal Acquisition System Based on FPGA and USB Interface[J].Computer Measurement & Control,2012,20(2):541-543. |
| |
| Authors: | Li Bao Cao Kejin Xu Jiangning Zhu Yinbing |
| |
| Affiliation: | (Naval University of Engineering,Department of Navigation Engineering,Wuhan 430033,China) |
| |
| Abstract: | A kind of inexpensive,high speed and reliable multi-channel data acquisition system based on FPGA and USB interface has been designed to satisfy the multi-channel signals processing in wireless navigation application.The system structure and key technique of cache realized by FPGA and SRAM are introduced,and the reliability of system is validated by hardware debug(SignalTap Ⅱ) in FPGA.The transmission speed of system can reach 20M bytes/s,which can be widely used in multi-channel and high speed data acquisition application,and has been put in practical use. |
| |
| Keywords: | wireless navigation data acquisition FPGA USB SRAM |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
