首页 | 本学科首页   官方微博 | 高级检索  
     

硅微机械谐振式陀螺仪的技术研究
引用本文:盛平,王寿荣,许宜申.硅微机械谐振式陀螺仪的技术研究[J].测控技术,2006,25(10):10-12.
作者姓名:盛平  王寿荣  许宜申
作者单位:东南大学,仪器科学与工程系,江苏,南京,210096
基金项目:国家高技术研究发展计划(863计划)
摘    要:介绍了硅微机械谐振式陀螺仪的工作原理,设计了一种新型微机械谐振式陀螺,并用有限元方法进行了仿真,制造了一批样机,进行了初步的驱动特性实验.结果表明,该微机械谐振陀螺仪实际驱动模态的谐振频率与仿真值的最大误差小于6%,满足设计要求.

关 键 词:陀螺  频率输出  双端音叉谐振器  硅微机械  谐振式  陀螺仪  技术研究  Gyroscope  Resonant  Silicon  最大误差  谐振频率  驱动模态  机械谐振  结果  特性实验  制造  仿真  有限元方法  设计  工作原理
文章编号:1000-8829(2006)10-0010-03
收稿时间:2006-03-01
修稿时间:2006年3月1日

Research on Silicon Micromechanical Resonant Gyroscope
SHENG Ping,WANG Shou-rong,XU Yi-shen.Research on Silicon Micromechanical Resonant Gyroscope[J].Measurement & Control Technology,2006,25(10):10-12.
Authors:SHENG Ping  WANG Shou-rong  XU Yi-shen
Abstract:The operating principle of a silicon micromechanical resonant gyroscope is introduced.A micromechanical resonant gyroscope has been designed,simulated and preliminarily tested.The drive characteristics of the gyroscope at atmospheric pressure are tested and the results indicated that the maximum error between the practical resonant frequencies and the simulative ones is within 6% meeting the design requirements.
Keywords:gyroscope  frequency output  double-ended tuning fork resonator  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号