首页 | 本学科首页   官方微博 | 高级检索  
     

基于PXI总线的行波记录仪的设计与实现
引用本文:陶玲,范圣韬,李夏青,曹泽莼.基于PXI总线的行波记录仪的设计与实现[J].计算机工程与设计,2008,29(1):196-198.
作者姓名:陶玲  范圣韬  李夏青  曹泽莼
作者单位:1. 北京化工大学,北京,100029
2. 北京航空航天大学,北京,100083
3. 北京石油化工学院,北京,102617
4. 中国石油大学机电工程学院,北京,102249
摘    要:基于 PXI 总线,通过 NI PXI-5112 数据采集卡,利用其提供的底层驱动使用C语言进行二次开发,实现了对地铁牵引供电系统发生故障时产生的行波信号的灵活有效地采集与存储,大大增加了连续数据采集的时间;同时,采用在判断触发前增加预处理程序,即在判断是否满足触发条件前,先将数据进行滤波,然后再进行判断,以及门限阈值和变化率相结合的触发方式,减少了由干扰造成的误触发和增强了触发的有效性和可靠性.

关 键 词:行波  数据采集  数据存储  PXI总线  C语言
文章编号:1000-7024(2008)01-0196-03
收稿时间:2007-01-22
修稿时间:2007年1月22日

Design and realization of traveling wave recording device based on PXI bus
TAO Ling,FAN Sheng-tao,LI Xia-qing,CAO Ze-chun.Design and realization of traveling wave recording device based on PXI bus[J].Computer Engineering and Design,2008,29(1):196-198.
Authors:TAO Ling  FAN Sheng-tao  LI Xia-qing  CAO Ze-chun
Abstract:The traveling wave recording device is developed based on PXI bus using NI PXI-5112 data acquisition card and C programming language which can acquire and storage the traveling wave flexibly and effectively when the traction power supply system in subway faults. The time of continuous data acquisition is greatly increased. Adopting the way of adding filter pretreatment before judging triggering qualification and the triggering mode considering threshold and increment, which decreased the triggering mistakes of disturbing caused and increased the validity and reliability of triggering.
Keywords:traveling wave  data acquisition  data saving  PXI bus  C programming language
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号