| 基于CATIA的平面盘形凸轮从动件运动规律反求研究 |
| |
| 引用本文： | 程永明,冯春,李柏林,何朝明.基于CATIA的平面盘形凸轮从动件运动规律反求研究[J].计算机应用,2006,26(5):1234-1236. |
| |
| 作者姓名： | 程永明 冯春 李柏林 何朝明 |
| |
| 作者单位： | 西南交通大学,机械工程学院,四川,成都,610031 |
| |
| 基金项目： | 国家科技攻关项目;四川省科技攻关项目;西南交通大学校科研和教改项目 |
| |
| 摘 要： | 研究了从CATIA数字模型中获取凸轮轮廓曲线上离散点坐标的方法,并以这些离散点及凸轮机构基本尺寸为依据,提出了反求机构从动件的运动规律的方法。利用CATIA提供的COM功能，结合其自带的V5Automation API函数开发了反求从动件的运动规律算法及程序，并对反求所得结果与理论结果进行了误差分析,研究表明本文提出方法是准确的和适用的。
|
| 关 键 词： | 凸轮机构 运动分析 反求设计 |
| 文章编号： | 1001-9081（2006）05-1234-03 |
| 收稿时间： | 2005-11-16 |
| 修稿时间： | 2005-11-162006-01-11 |
Research of Inverse-design for Cam follower motion rule based on COM technology |
| |
| CHENG Yong-ming,FENG Chun,LI Bai-lin,HE Chao-ming.Research of Inverse-design for Cam follower motion rule based on COM technology[J].journal of Computer Applications,2006,26(5):1234-1236. |
| |
| Authors: | CHENG Yong-ming FENG Chun LI Bai-lin HE Chao-ming |
| |
| Affiliation: | School of Mechanical Engineering, Southwest Jiaotong University, Sichuan Chengdu 610031, China |
| |
| Abstract: | The method to obtain the coordinate va1ues of discrete point on the plate cam profile from the numerical model of CATIA was studied. The method for the motion regulation of the plate cam follower was provided on inverse design by use of given discrete point. By using the VBA technology of CATIA and V5 Automation API function, the program of the cam follower anti-resolve kinematics analysis procedure was developed. The error between the measure results and the theoretic results was analyzed. The result shows its effectivity and applicability. |
| |
| Keywords: | VBA CATIA |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《计算机应用》浏览原始摘要信息 |
|
点击此处可从《计算机应用》下载全文 |
