Cost-effective design for injection molding

It is commonly agreed that a large proportion of the ultimate product cost is determined at product design stage. Therefore, a cost-effective design cannot be obtained unless all cost issues are resolved at early design stage. Therefore, instead of performing cost estimation after design, research presented in this paper aims to provide on-line cost evaluation and advisory to help product designers avoid cost-ineffective design. The objective can be obtained by (1) identifying factors that might affect product cost at each product design stage, (2) developing a design for cost effectiveness methodology that accommodates the concepts of concurrent engineering, and (3) developing a computer-based design for cost effectiveness system based on the proposed methodology. In this research, we focus on injection molding product design due to the advantages of injection molding process, such as high production rates, excellent quality and accuracy of the parts, and very long mold life. This paper first reviews and characterizes the conventional molding product development process with an emphasis on the identification of cost factors. Based on the results of process characterization, a cost model is developed, which depicts the relationships between cost factors and product development activities, as well as their relationships with product geometry. According to the product life cycle activities and the cost model, a design for cost effectiveness process is proposed. The process and the cost model are then employed for the development of a computer-based product design for cost effectiveness as one of the module of an integrated design for injection molding environment.