首页 | 本学科首页   官方微博 | 高级检索  
     

提高瞬态电流自动测试生成时间效率的方法
引用本文:张鑫,邝继顺. 提高瞬态电流自动测试生成时间效率的方法[J]. 计算机应用研究, 2006, 23(6): 82-84
作者姓名:张鑫  邝继顺
作者单位:湖南大学,计算机与通信学院,湖南,长沙,410082;湖南大学,计算机与通信学院,湖南,长沙,410082
基金项目:国家自然科学基金资助项目(60173042)
摘    要:瞬态电流测试可以检测一些用电压测试和稳态电流测试不能检测的故障。对每一个故障都进行一次测试生成所花费的时间太多,而且没有必要。针对用瞬态电流测试来检测晶体管开路故障(Stuckopen Fault),研究精简故障数目,提高测试生成效率的方法。通过从靠近电路原始输出端向原始输入端逐渐进行测试生成以及其他一些办法,可以明显提高测试生成的时间效率。模拟实验结果表明,测试生成算法执行时间大约减少了70%。

关 键 词:测试生成  开路故障  可控制性  CMOS数字电路
文章编号:1001-3695(2006)06-0082-03
收稿时间:2005-04-24
修稿时间:2005-06-13

Methods for Enhancing ATPG Efficiency of Dynamic Current Testing
ZHANG Xin,KUANG Ji shun. Methods for Enhancing ATPG Efficiency of Dynamic Current Testing[J]. Application Research of Computers, 2006, 23(6): 82-84
Authors:ZHANG Xin  KUANG Ji shun
Abstract:Dynamic current testing can detect some faults that cannot be detected by voltage based test method and quiescent current test method. It takes too much of time to generate a test pattern for each fault, and it is not necessary. This paper focuses on how to reduce the number of stuck-open fauhs detected by dynamic current test technique for enhancing the ATPG efficiency. This can be done in the way that nearer the site of a fault to the primary outputs of the circuit under test, earlier the ATPG for this fault starts. Experimental results show that about 70% of ATPG time is cut down.
Keywords:ATPG   Stuck-open Fault   Controllability   CMOS Circuit
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《计算机应用研究》浏览原始摘要信息
点击此处可从《计算机应用研究》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号