首页 | 本学科首页   官方微博 | 高级检索  
     

深海热液声学原位测温仪中的声源选择研究
引用本文:吴民忠,樊炜,毛洁,潘华辰.深海热液声学原位测温仪中的声源选择研究[J].自动化仪表,2010,31(4):5-7,11.
作者姓名:吴民忠  樊炜  毛洁  潘华辰
作者单位:杭州电子科技大学机械工程学院,浙江,杭州,310018
基金项目:国家高技术研究发展计划(863计划) 
摘    要:为了选择合适的声源信号.提高深海热液声学原位测温仪的测量精度,针对热液口的声学特性,在分析了信号频率范围和声压级要求的基础上,采用信号发射卡驱动水声换能器发声,然后通过数据采集卡采集换能器接收到的声波信号.同时,对几种典型声信号进行了常温湖水声波飞渡时间实验.实验结果表明,18~23 kHz的扫频信号可作为合适的声源信号.这不仅为声学测温中的声源选择提供了指导,而且对水下短距离声波的延时测量也具有一定的参考价值.

关 键 词:声学测温  水声换能器  飞渡时间  扫频信号  噪声强度

Study on Selection of Sound Sources in Acoustic In-situ Detector of Temperature for Deep Sea Hydrothermal Vent
Wu Minzhong Fan Wei Mao Jie,et al..Study on Selection of Sound Sources in Acoustic In-situ Detector of Temperature for Deep Sea Hydrothermal Vent[J].Process Automation Instrumentation,2010,31(4):5-7,11.
Authors:Wu Minzhong Fan Wei Mao Jie  
Abstract:In order to select appropriate sound source signal for enhancing measurement accuracy of the acoustic temperature detector for deep sea hydrothermal vents,in accordance with the acoustic characteristics of the hydrothermal vent,and on the basis of requirements of frequency range and sound level of signals in measuring procedures,by using signal transmitting module to energize marine acoustic transducer for generating sound,then collect the sound wave signal from transducer through data acquisition module. I...
Keywords:Acoustic temperature measurement Marine acoustic transducer Flying time Frequency sweeping signal Noise intensity  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号