| 纳米测量机传感器信号显示与切换系统的设计 |
| |
| 引用本文： | 卢歆,雷李华,沈瑶琼,李源,王丽华.纳米测量机传感器信号显示与切换系统的设计[J].自动化仪表,2012,33(1):63-65,69. |
| |
| 作者姓名： | 卢歆 雷李华 沈瑶琼 李源 王丽华 |
| |
| 作者单位： | 1. 中国计量学院计量测试工程学院,浙江杭州310018;上海市计量测试技术研究院,上海201203
2. 上海市计量测试技术研究院,上海,201203 |
| |
| 基金项目： | 国家质检总局科研计划基金资助项目 |
| |
| 摘 要： | 为提高纳米坐标测量机的测量效率,降低因测头切换频繁引起的设备故障率,设计了一个具有测头测量信号/观察信号切换并能够实时显示测量信号电压值的装置,该装置主要以C8051F单片机为核心,通过A/D转换芯片和液晶显示模块实现信号电压值的显示功能,同时通过多路选通开关实现信号切换功能.试验表明,该装置的电压示值与输入电压的标准值之间的偏差为0.005 V,并且切换操作简便、准确安全,可以很好地实现显示和切换功能.
|
| 关 键 词： | C8051F 信号切换 液晶显示 纳米测量机 A/D转换 |
Design of the Sensor Signal Display and Switching System for Nano Measuring Machine |
| |
| Lu Xin Lei Lihua Shen Yaoqiong Li Yuan Wang Lihua.Design of the Sensor Signal Display and Switching System for Nano Measuring Machine[J].Process Automation Instrumentation,2012,33(1):63-65,69. |
| |
| Authors: | Lu Xin Lei Lihua Shen Yaoqiong Li Yuan Wang Lihua |
| |
| Affiliation: | Lu Xin Lei Lihua Shen Yaoqiong Li Yuan Wang Lihua |
| |
| Abstract: | In order to enhance the measuring efficiency of the nano measuring coordinate machine and reduce the fault rate of the equipment because of frequently switching of the measuring probes,the device that can switching the measured signal and the observed signal,and displaying the voltage value of the measured signal is designed.The device mainly consists of the single chip computer C8051F as the core,and the A/D conversion chip and LCD module to implement the function of displaying the voltage value,and via multiple channels gate switch to switch the signals.The experiments show that the deviation between the displayed voltage of this device and the standard input voltage is less than 0.005V,the switching operation is simple,precise and safety,the device is able to well implement display and switching functions. |
| |
| Keywords: | C8051F Signal switching LCD Nano measuring machine(NMM) A/D conversion |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
