首页 | 本学科首页   官方微博 | 高级检索  
     

嵌入式系统中TFT液晶软硬件设计
引用本文:崔永泽,葛良全,肖鹏,高超.嵌入式系统中TFT液晶软硬件设计[J].传感器与微系统,2007,26(11):90-92.
作者姓名:崔永泽  葛良全  肖鹏  高超
作者单位:成都理工大学,核技术与自动化工程学院,四川,成都,610059
基金项目:国家自然科学基金 , 中国地质大调查计划
摘    要:给出S3C2410嵌入式系统上TFT-LCD的工作原理、硬件结构和软件设计。TFT-LCD作为该嵌入式系统的显示设备,在L inux下的驱动程序采用帧缓冲设备来处理与LCD控制器有关的底层命令,程序读取显示缓冲区的数据就可以完成对应用程序图形模式下图形的绘制。通过对系统中软硬件的设计,达到使TFT液晶能够正常显示的目的。详细的软件与硬件设计,可以对嵌入式系统的开发及移植起到一定的指导做用。

关 键 词:嵌入式系统  字符设备  驱动程序
文章编号:1000-9787(2007)11-0090-03
修稿时间:2007-03-26

Software and hardware design of TFT-LCD in embedded system
CUI Yong-ze,GE Liang-quan,XIAO Peng,GAO Chao.Software and hardware design of TFT-LCD in embedded system[J].Transducer and Microsystem Technology,2007,26(11):90-92.
Authors:CUI Yong-ze  GE Liang-quan  XIAO Peng  GAO Chao
Affiliation:Nuclear Technology and Automation Engineering College Chengdu University of Technology, Chengdu 610059, China
Abstract:The work principle, hardware configuration and software design of the embedded system TFT-LCD are given. TFT-LCD regards as the display device of the embedded system ,its device drivers must be implemented as Linux frame buffer device drivers in addition to those low level operations which only deal with commands provided by LCD controllers. In order to display the graphic which is in the graphic mode of the application software, programmer can get the data from the frame buffer device by receiving. By the design of the software and hardware in embedded system,it can arrive that TFT-LCD can be run normally. Detailed design may supervise explordering and transplant which used in embedded system in future.
Keywords:embedded system  char device  device programme
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号