首页 | 本学科首页   官方微博 | 高级检索  
     

机器人立体视觉中摄像机的标定
引用本文:李艳辉,吴玲,尚胤彤.机器人立体视觉中摄像机的标定[J].自动化技术与应用,2012,31(3):61-63,81.
作者姓名:李艳辉  吴玲  尚胤彤
作者单位:东北石油大学电气信息工程学院,黑龙江大庆,163318
摘    要:针对机器人立体视觉标定问题,提出一种介于传统标定法和自标定法之间的摄像机标定方法。与传统方法相比,将内参数、畸变参数与外参数分别标定。首先根据张氏平面标定法求出内参数;其次在考虑透镜径向畸变的基础上求出畸变参数;最后重点探讨在摄像机带有运动的情况下外参数的标定方法,避免了在原有标定环境下摄像机运动时需要重新标定的问题。实验依据传统标定的模板原理,结合双目立体视觉模型,验证了该种分离标定方法的可行性。

关 键 词:立体视觉  摄像机标定  分离标定  径向畸变  重新标定

The Robot Stereovision Camera Calibration
LI Yan-hui , wu Ling , SHANG Yin-tong.The Robot Stereovision Camera Calibration[J].Techniques of Automation and Applications,2012,31(3):61-63,81.
Authors:LI Yan-hui  wu Ling  SHANG Yin-tong
Affiliation:(University,Electrical information engineering college Northeast Petroleum,Daqing 163318 China)
Abstract:Aiming at the problem of the robot stereovision calibration,this paper offers a method of camera calibration which is between the traditional calibration and the self-calibration.To compare with traditional methods,set the internal parameters、distortion parameters and external parameters calibrated respectively.First of all,working out the internal parameters by Zhang Z.Y plane calibration method;secondly,calculating the distortion parameters based on the radial distortion lens;finally,discussing the calibration methods of external parameters in the case of the camera is moving,to avoid the problem of recalibration when the camera is moving in original calibration environment.The experiment according to the template principle of traditional calibration,combined with binocular stereovision model,verifies the feasibility of this separation calibration method.
Keywords:stereovision  camera calibration  separation calibration  radial distortion  recalibration
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号