| 低熔点无铅焊料的研制 |
| |
| 引用本文： | 李元山[,] 雷晓娟,陈振华.低熔点无铅焊料的研制[J].计算机工程与科学,2007,29(12):140-142. |
| |
| 作者姓名： | 李元山[ ] 雷晓娟 陈振华 |
| |
| 作者单位： | [1]湖南大学材料科学与工程学院,湖南长沙410082 [2]国防科技大学计算机学院,湖南长沙410073 |
| |
| 摘 要： | 现有的Sn-Ag-Cu无铅焊料其关键问题是熔点比传统的Sn-37Pb高34℃～38℃，使得焊接设备和工艺都必须更换。我们在Sn-20Bi焊料的基础上通过添加微量元素并采用快速凝固的方法研制出一种新型的低熔点焊料。该焊料价格远低于Sn-Ag-Cu，其机械性能、热性能、可焊性以及熔点都接近或优于Sn-37Pb。
|
| 关 键 词： | 无铅焊料 低熔点 Sn-Bi-X 偏析 快速凝目 |
| 文章编号： | 1007-130X（2007）12-0140-03 |
| 收稿时间： | 2006-09-25 |
| 修稿时间： | 2007-01-23 |
Research and Fabrication of Low Melting Point Lead-Free Solder |
| |
| LI Yuan-shan,LEI Xiao-juan,CHEN Zhen-hua.Research and Fabrication of Low Melting Point Lead-Free Solder[J].Computer Engineering & Science,2007,29(12):140-142. |
| |
| Authors: | LI Yuan-shan LEI Xiao-juan CHEN Zhen-hua |
| |
| Abstract: | The key problem of the current Sn-Ag-Cu lead-free solders is that their melting points are 34℃-38℃ higher than that of the traditional Sn-37Pb, both the soldering equipment and technology process have to be replaced. A novel low welting point solder is fabricated by adding microelements and using a rapid solidification method based on the Sn-20Bi sold- er. The cost of the solder is much lower than that of Sn-Ag-Cu. Its mechanical and thermal properties, solderability and welting point are equivalent or superior to Sn-37Pb. |
| |
| Keywords: | lead-free solder low welting point Sn-Bi-X segregation rapid solidification |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《计算机工程与科学》浏览原始摘要信息 |
|
点击此处可从《计算机工程与科学》下载全文 |
