| 7A52铝合金焊缝应力腐蚀性能研究 |
| |
| 引用本文： | 刘玲霞,周古昕,成建国,王生,乔立.7A52铝合金焊缝应力腐蚀性能研究[J].中国材料科技与设备,2008,5(5):59-61. |
| |
| 作者姓名： | 刘玲霞 周古昕 成建国 王生 乔立 |
| |
| 作者单位： | 中国兵器科学研究院宁波分院轻质材料研究所,浙江宁波315103 |
| |
| 摘 要： | 本文用20mm厚的7A52铝合金板材，采用钨极氩孤焊接工艺焊接，用慢应变速率实验方法，应变速率为1．58×10^-6s^-1，在3．5％氯化钠溶液和惰性气体中，研究了7A52铝合金焊接接头的应力腐蚀性能。试验结果表明：7A52铝舍金焊缝对应力腐蚀较为敏感，在3．5％氯化钠溶液中应力腐蚀断裂均发生在焊缝熔合线附近区，而在惰性气体中试样断裂发生在焊缝中间部位。
|
| 关 键 词： | 7A52铝合金 焊接接头 慢应变速率 应力腐蚀 |
Research of Stress Corroded Properties on Welding Joint of 7A52 Aluminum Alloy |
| |
| LIU Ling-xia,ZHOU Gu-xin,CHENG Jian-guo,WANG Sheng,QIAO Li.Research of Stress Corroded Properties on Welding Joint of 7A52 Aluminum Alloy[J].Chinese Materials Science Technology & Equipment,2008,5(5):59-61. |
| |
| Authors: | LIU Ling-xia ZHOU Gu-xin CHENG Jian-guo WANG Sheng QIAO Li |
| |
| Affiliation: | (Ningbo Branch of China Academy of Ordnance Science, Zhejiang,Ningbo,315103,China) |
| |
| Abstract: | Metal-Inert Gas welding of 7A52 aluminum plate of 20 mm thickness were completed, stress corrosion properties Of welding joint of 7A52 aluminum alloy is research by 1.58 ×10^-6s^-1 slow strain rate tests in 3.5 % NaCl solution and the inert gases. Test results show： welding joint of 7A52 aluminum alloy is sensitivity on stress corrosion. Stress corrosion cracking happen to the neighborhood of weld junction in 3.5 %NaCl solution, and that stress corrosion cracking happen to the middle of weld junction in the inert gases. |
| |
| Keywords: | 7A52 aluminum alloy Welding joint Slow strain rate Stress corrosion |
| 本文献已被 维普 等数据库收录！ |
|
