| PE—MA对PE／CaCO3增容作用的研究 |
| |
| 引用本文： | 王益龙,蹇锡高.PE—MA对PE／CaCO3增容作用的研究[J].高分子材料科学与工程,1993,9(5):46-50. |
| |
| 作者姓名： | 王益龙 蹇锡高 |
| |
| 作者单位： | 大连理工大学化工学院高分子材料系，大连理工大学化工学院高分子材料系，大连理工大学化工学院高分子材料系，大连理工大学化工学院高分子材料系，中国科学院长春应用化学研究所 大连 116012，大连 116012，大连 116012，大连 116012，研究员 本校兼职教授 |
| |
| 摘 要： | 本文通过加入接枝马来酸酐的聚乙烯(PE-MA),促进非报性的聚乙烯分子和带有极性表面的填料之间的互容。用扫描电子显微镜观察共混物低温脆断面上碳酸钙的分布表明,在加有增容剂PE-MA的PE/CaCO_3共混物中,CaCO_3颗粒大小均匀且分布也均匀,PE-MA明显起到了增容作用。综合结果指出,PE-MA的加入量占PE/CaCO_3/PE-MA总重量的5～10％时增容效果较好。力学性能测试表明,随PE-MA用量的增加,共混物的拉伸强度明显提高。断裂伸长率变化较小,熔融指数略有下降。
|
| 关 键 词： | 接枝 马来酸酐 聚乙烯 填充 增容 |
THE STUDY OF THE MORPHOLOGY AND MECHANICAL PROPERTIES OF PE-MA COMPATIBILIZING PE/CaCO_3 BLENDS |
| |
| Wang Yilong,Jian Xigo,Zhang Hongjin,Wang Deyu and Huang Baotong.THE STUDY OF THE MORPHOLOGY AND MECHANICAL PROPERTIES OF PE-MA COMPATIBILIZING PE/CaCO_3 BLENDS[J].Polymer Materials Science & Engineering,1993,9(5):46-50. |
| |
| Authors: | Wang Yilong Jian Xigo Zhang Hongjin Wang Deyu and Huang Baotong |
| |
| Abstract: | The effect of grafting maleic anhydride onto polyethylene(PE-MA) as a compatibilizer for PE and CaCO3 system on morphology and mechanical properties were studied. The results of strain-stress, impact test and melt index (MI) measurment indicate that within the present experiment compositions of the blend, tensile strength and low temperature impact strength incease and MI decrease with increasing proportion of PE-MA in the blend of PE/CaCO3/PE-MA. The scanning electron micrograph(SEM) and contrast of the mechanical properties of PE/CaCO3 and PE/CaCO3/PE-MA in the same rasin proportion explains the PE-MA compatibilization for PE and CaCO3 blends. |
| |
| Keywords: | maleative polyethylene PE blend with filler compatibilization morphology of blend |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
