| 熔融挤出插层制备聚丙烯/蒙脱土纳米复合材料的探讨(Ⅰ) |
| |
| 引用本文： | 宋国君,李培耀,殷兰兰.熔融挤出插层制备聚丙烯/蒙脱土纳米复合材料的探讨(Ⅰ)[J].高分子材料科学与工程,2006,22(1):166-169. |
| |
| 作者姓名： | 宋国君 李培耀 殷兰兰 |
| |
| 作者单位： | 青岛大学高分子材料研究所,山东,青岛,266071 |
| |
| 摘 要： | 通过双螺杆挤出机熔融挤出法制备出插层型聚丙烯/蒙脱土纳米复合材料。利用有机蒙脱土的预凝胶测试,复合材料的透射电子显微镜(TEM)观察,熔体流动指数测试(M I),力学性能测试,耐热性测试等方法进行了表征。结果表明,通过本方法制备的聚丙烯/蒙脱土复合材料是典型的插层型纳米复合材料。该复合材料在有机蒙脱土质量分数仅为4.0%时缺口冲击强度提高了103%,耐热性有所提高,而屈服强度、刚性基本不变,为研制PPR管等同时具有高韧性和高耐热性的聚丙烯产品开辟了一条崭新的途径。
|
| 关 键 词： | 插层型纳米复合材料 相似相容原理 韧性 热变形温度 PPR管 |
| 文章编号： | 1000-7555（2006）01-0166-04 |
| 收稿时间： | 2004-11-15 |
| 修稿时间： | 2005-06-07 |
INVESTIGATION OF POLYPROPYLENE/MONTMORILLONITE NANOCOMPOSITES VIA MELT EXTRUSION INTERCALATION |
| |
| SONG Guo-jun,LI Pei-yao,YIN Lan-lan.INVESTIGATION OF POLYPROPYLENE/MONTMORILLONITE NANOCOMPOSITES VIA MELT EXTRUSION INTERCALATION[J].Polymer Materials Science & Engineering,2006,22(1):166-169. |
| |
| Authors: | SONG Guo-jun LI Pei-yao YIN Lan-lan |
| |
| Affiliation: | Institute of Polymer Materials, Qingdao University, Qingdao 266071, China |
| |
| Abstract: | Polypropylene/Montmorillonite(PP/MMT) nanocomposites were obtained via melt-intercalation in twin screw extruder.The nanocomposites have been characterized by transmission electron microscopy(TEM)observation,melt flow index(MI) testing,mechanical properties examination,thermal deformation temperature testing etc.Testing result indicates that intercalation nanocomposites have been prepared.With 4% addition of organoclay,the notched impact strength of the nanocomposites increases 103% over pure PP,but the thermal deformation propertis,yield strength and stiffness changes a little;so this PP/MMT nanocomposites break a new road for the preparation of products with high toughness and high thermal deformation propertis such as the PPR tubes. |
| |
| Keywords: | intercalation nanocomposites similar dissolve mutually theory toughness thermal deformation temperature PPR tube |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
